TOOL-Cart
About the TOOL-Cart PCB
TOOL-Cart is an open source AVR/Arduino PCB design by NaokiS28, published on GitHub. It is a 2-layer board measuring 98 × 85.6 mm, with 9 components from 8 distinct parts.
Its main chip is the ATmega2560-16AU, from the AVR/Arduino family. Other key parts include the CH340C. By type, the board carries 2 ICs, 2 connectors, 2 jumpers, 2 resistors and 1 switch.
From the project
Schematics and pinout information for the Konami System 573
Please note a lot of this data is not 100% complete and might be incorrect in places. Also this repository needs to be generally organised better.
Main components on the TOOL-Cart
TOOL-Cart bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega2560-16AU | TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Security Cart Edge | Security_Cart | J1 |
| 1 | USB_B_Mini | USB_Mini-B_Wuerth_65100516121_Horizontal | J2 |
| 1 | Cart Pins | PinSocket_2x22_P2.54mm_Vertical | JP1 |
| 1 | ATMEGA-ICSP | PinSocket_2x03_P2.54mm_Vertical | JP4 |
| 1 | SW_DIP_x04 | SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 2 | 22 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
TOOL-Cart design files
The KiCad project lives in the NaokiS28/Konami-System-573-Documentation repository on GitHub; these links point at the commit this page was built from.
TOOL-Cart: common questions
What microcontroller does the TOOL-Cart use?
The TOOL-Cart is built around the ATmega2560-16AU, from the AVR/Arduino family.
How big is the TOOL-Cart PCB?
The TOOL-Cart measures 98 × 85.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TOOL-Cart?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the TOOL-Cart design files?
From the NaokiS28/Konami-System-573-Documentation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TOOL-Cart design in my own project?
The repository has no license, so all rights stay with NaokiS28. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TOOL-Cart without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Konami-System-573-Documentation
GX700-PWB
147.5 × 100 mm121 parts2LNo license16
GX894-PWB
231 × 155 mm120 parts2LNo license16
Ksys573
295 × 285 mm112 parts4LNo license16
GN845-PWB
185 × 110 mm106 parts2LNo license16
AVR/ArduinoPCMCIA-Card
100.5 × 47 mm29 parts2LNo license16
GE765-PWB
147.5 × 100 mm10 parts2LNo license16
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k