HardLabs

PCMCIA-Card

NaokiS28·Konami-System-573-Documentation·Homebrew/Hardware/PCMCIA-Card/PCMCIA-Card.kicad_pcb

PCMCIA-Card PCB layout, top view — open source AVR/Arduino board by NaokiS28

About the PCMCIA-Card PCB

PCMCIA-Card is an open source AVR/Arduino PCB design by NaokiS28, published on GitHub. It is a 2-layer board measuring 100.5 × 47 mm, with 29 components from 22 distinct parts.

Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. Other key parts include the 29F016-TSOP-SP, CH376S and 74LS139. By type, the board carries 7 ICs, 7 capacitors, 5 resistors, 4 connectors, 3 diodes and 1 transistor.

From the project

Schematics and pinout information for the Konami System 573

Please note a lot of this data is not 100% complete and might be incorrect in places. Also this repository needs to be generally organised better.

Main components on the PCMCIA-Card

29F016-TSOP-SPATmega32U4-AUCH376S74LS139

PCMCIA-Card bill of materials (BOM)

29 components, 22 distinct parts.

QtyPartRefs
4
29F016-TSOP-SP
U1, U2, U5, U6
1
ATmega32U4-AU
U3
1
CH376S
U4
1
74LS139
U7
1
BC847
Q1
1
Crystal
Y1
1
PCMCIA Plug
J1
1
SD_Card
J2
1
USB_A
J3
1
USB_B_Micro
J6
1
Conn_01x06_Male
ICSP1
2
LED
D1, D2
1
ACT
D3
1
C_Small
C1
1
15pf
C2
2
0.1uf
C3, C4
1
100uf
C5
1
10uf
C6
1
0.uf
C7
1
R_Small
R1
Show 2 more
QtyPartRefs
2
1k
R2, R5
2
1
R3, R4

PCMCIA-Card design files

The KiCad project lives in the NaokiS28/Konami-System-573-Documentation repository on GitHub; these links point at the commit this page was built from.

PCMCIA-Card: common questions

What microcontroller does the PCMCIA-Card use?

The PCMCIA-Card is built around the ATmega32U4-AU, from the AVR/Arduino family.

How big is the PCMCIA-Card PCB?

The PCMCIA-Card measures 100.5 × 47 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCMCIA-Card?

29 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCMCIA-Card design files?

From the NaokiS28/Konami-System-573-Documentation repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCMCIA-Card design in my own project?

The repository has no license, so all rights stay with NaokiS28. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCMCIA-Card without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Konami-System-573-Documentation

Similar boards