HardLabs

NARAEON Development Board

NARAE-INHA-UNIV·NARAEON-hw·DevTool/DevTool.kicad_pcb

NARAEON Development Board layout, top view — open source board by NARAE-INHA-UNIV

About the NARAEON Development Board

NARAEON Development Board is an open source PCB design by NARAE-INHA-UNIV, published on GitHub. It is a 2-layer board measuring 45 × 55.5 mm, with 21 components from 17 distinct parts.

By type, the board carries 19 connectors, 1 switch and 1 capacitor.

It belongs with the robotics & motion, sensors and dev boards & breakouts designs in this gallery.

From the project

STM32-based flight controller designed with KiCAD.

NARAEON은 인하대학교 모형항공기 동아리 '나래'(NARAE)에서 개발 중인 오픈소스 비행제어컴퓨터(FC) 프로젝트입니다. 이 프로젝트는 학술적 연구, 개발 그리고 취미 활동을 목적으로 하는 모든 분들을 위해 하드웨어, 펌웨어를 포함하고 있습니다.

- STM32-FC : Firmware & Source code - NALDA : GCS

- ICM-45686 & ICM-42688-P dual IMU - LIS2MDL eCompass - ICP-20100 pressure sensor - 내장 Flash memory & Micro SD card - IBUS, SBUS, SRXL2, ELRS, PPM RC 프로토콜 지원

NARAEON 프로젝트는 여러분의 참여를 언제나 환영합니다! 버그 리포트, 기능 제안, 코드 기여 등 어떤 형태의 기여도 프로젝트 발전에 큰 힘이 됩니다. 기여하고 싶으시다면 다음을 참고해 주세요.

NARAEON Development Board, from the project README
From the project README

NARAEON Development Board bill of materials (BOM)

21 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
C189892
2.54mm 6P
J1, J10
1
USB_C_USB2.0_16P
GH 1.25mm 6P
J2
2
C189892
GH 1.25mm 4P
J3, J15
1
DM3AT-SF-PEJM5
GH 1.25mm 6P
J4
2
PWM_CONN_3X04
GH 1.25mm 4P
J5, J7
1
PWM_CONN_3X04
GH 1.25mm 6P
J6
1
C161692
GH 1.25mm 4P
J9
1
C189892
2.54mm 4P
J11
1
C161692
GH 1.25mm 6P
J12
1
C161692
ZH 1.5mm 4P
J14
1
GH 1.25mm 6P
J16
2
2.54mm 4P
J18, J19
1
2.54mm 6P
J20
1
GH 1.25mm 4P
J22
1
ZH 1.5mm 4P
J23
1
SW_Push
SW1
1
10PF
0.1u
C1

NARAEON Development Board design files

The KiCad project lives in the NARAE-INHA-UNIV/NARAEON-hw repository on GitHub; these links point at the commit this page was built from.

NARAEON Development Board: common questions

How big is the NARAEON Development Board?

The NARAEON Development Board measures 45 × 55.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NARAEON Development Board?

21 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NARAEON Development Board design files?

From the NARAE-INHA-UNIV/NARAEON-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NARAEON Development Board design in my own project?

The repository has no license, so all rights stay with NARAE-INHA-UNIV. Use it as a reference, and ask the author before reusing the design.

More boards in NARAEON-hw

Similar boards