Cool display thing

naran-579·Cool-display-thing·hardware/Cool Display thing/Cool Display thing.kicad_pcb

Cool display thing PCB layout, top view — open source RP2040/RP2350 board by naran-579

About the Cool display thing PCB

Cool display thing is an open source RP2040/RP2350 PCB design by naran-579, published on GitHub. It is a 2-layer board measuring 39.6 × 39.6 mm, with 5 components from 5 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 2 connectors, 1 IC, 1 switch and 1 capacitor.

It belongs with the displays & leds designs in this gallery.

From the project

This is a little matrix project that stands upright on your desk and can display whatever you want it to, all customizable with a GUI

This is a little matrix project that stands upright on your desk and can display whatever you want it to, all customizable with a GUI

1. Obtain the parts from BOM.CSV 2. Solder said parts onto the PCB 3. Install Micropython on the RP2040 4. Put the firmware from /firmware/Cool Matrix display thing/firmware onto the board 5. Customize the message using /firmware/Cool Matrix display thing/Matrix Studio.py 6. Everything should work

Cool display thing, from the project README
From the project README

Main components on the Cool display thing

Cool display thing bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
1
Conn_01x05
J1
1
Conn_01x06
J2
1
SW_Push
SW1
1
10uF
C1

Cool display thing design files

The KiCad project lives in the naran-579/Cool-display-thing repository on GitHub; these links point at the commit this page was built from.

Cool display thing: common questions

What microcontroller does the Cool display thing use?

The Cool display thing is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Cool display thing PCB?

The Cool display thing measures 39.6 × 39.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cool display thing?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cool display thing design files?

From the naran-579/Cool-display-thing repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Cool display thing design in my own project?

The repository has no license, so all rights stay with naran-579. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cool display thing without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards