Project-6-ESP32-MINIMUM-SYSTEM-BOARD
naveenrajpcb·project-6-ESP32-MINIMUM-SYSTEM-BOARD
About the Project-6-ESP32-MINIMUM-SYSTEM-BOARD
Project-6-ESP32-MINIMUM-SYSTEM-BOARD is an open source ESP32 PCB design by naveenrajpcb, published on GitHub. It is a 2-layer board measuring 90.5 × 93.5 mm, with 13 components from 11 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 3 capacitors, 3 resistors, 2 ICs, 2 connectors, 2 switches and 1 diode.
From the project
Project Overview This project is a custom ESP32-WROOM-32 Minimum System Board designed in KiCad 10. It includes the essential power supply, reset, boot, and GPIO header circuits required to run the ESP32 module.
Project Overview This project is a custom ESP32-WROOM-32 Minimum System Board designed in KiCad 10. It includes the essential power supply, reset, boot, and GPIO header circuits required to run the ESP32 module.
Features - ESP32-WROOM-32 Module - AMS1117-3.3V Voltage Regulator - 5V Input Terminal - Power LED - Reset Push Button - Boot Push Button - GPIO Header - Decoupling Capacitors - 2-Layer PCB Design
Main components on the Project-6-ESP32-MINIMUM-SYSTEM-BOARD
Project-6-ESP32-MINIMUM-SYSTEM-BOARD bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x02_Pin | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J1 |
| 1 | Conn_01x19_Pin | PinHeader_1x19_P2.54mm_Vertical | J2 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | BOOT | SW_PUSH_6mm | SW2 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | 10uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 2 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
Project-6-ESP32-MINIMUM-SYSTEM-BOARD design files
The KiCad project lives in the naveenrajpcb/project-6-ESP32-MINIMUM-SYSTEM-BOARD repository on GitHub; these links point at the commit this page was built from.
- LayoutPROJECT.6.kicad_pcb
- SchematicPROJECT.6.kicad_sch
Project-6-ESP32-MINIMUM-SYSTEM-BOARD: common questions
What microcontroller does the Project-6-ESP32-MINIMUM-SYSTEM-BOARD use?
The Project-6-ESP32-MINIMUM-SYSTEM-BOARD is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Project-6-ESP32-MINIMUM-SYSTEM-BOARD?
The Project-6-ESP32-MINIMUM-SYSTEM-BOARD measures 90.5 × 93.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Project-6-ESP32-MINIMUM-SYSTEM-BOARD?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Project-6-ESP32-MINIMUM-SYSTEM-BOARD design files?
From the naveenrajpcb/project-6-ESP32-MINIMUM-SYSTEM-BOARD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Project-6-ESP32-MINIMUM-SYSTEM-BOARD design in my own project?
The repository has no license, so all rights stay with naveenrajpcb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Project-6-ESP32-MINIMUM-SYSTEM-BOARD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k