Playboyzinho
nayetdet·playboyzinho·kicad/playboyzinho.kicad_pcb
About the Playboyzinho PCB
Playboyzinho is an open source ESP32 PCB design by nayetdet, published on GitHub. It is a 2-layer board measuring 143.2 × 185.5 mm, with 16 components from 9 distinct parts.
Its main chip is the esp32-s3-pl, from the ESP32 family. Other key parts include the (amplificador)_MAX98357_Module. By type, the board carries 9 switches and 7 ICs.
It belongs with the displays & leds designs in this gallery.
From the project
Playboyzinho is a custom firmware for an ESP32-based video game console, handling display, controls, and game execution.
Main components on the Playboyzinho
Playboyzinho bill of materials (BOM)
16 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | esp32-s3-pl | esp32-s3 | U1 |
| 1 | ~ | bateria | U2 |
| 1 | ~ | (dc dc) MT3608 | U3 |
| 1 | ~ | tela TFT 2.8 | U4 |
| 1 | ~ | (carregador) TP4056 | U5 |
| 1 | ~ | indicador-bateria | U6 |
| 1 | (amplificador)_MAX98357_Module | (amplificador) MAX98357_Module | U7 |
| 8 | SW_Push | botao | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | SW_SPDT | alavanca | SW9 |
Playboyzinho design files
The KiCad project lives in the nayetdet/playboyzinho repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/playboyzinho.kicad_pcb
- Schematickicad/playboyzinho.kicad_sch
Playboyzinho: common questions
What microcontroller does the Playboyzinho use?
The Playboyzinho is built around the esp32-s3-pl, from the ESP32 family.
How big is the Playboyzinho PCB?
The Playboyzinho measures 143.2 × 185.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Playboyzinho?
16 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Playboyzinho design files?
From the nayetdet/playboyzinho repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Playboyzinho design in my own project?
The repository has no license, so all rights stay with nayetdet. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Playboyzinho without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k