V2 XIAO MAINBOARD
About the V2 XIAO MAINBOARD PCB
V2 XIAO MAINBOARD is an open source ESP32 PCB design by NB6RULES, published on GitHub. It is a 2-layer board measuring 90.3 × 40.3 mm, with 12 components from 6 distinct parts.
Its main chip is the Module_XIAO-ESP32S3, from the ESP32 family. By type, the board carries 6 resistors, 1 module and 1 connector.
V2 XIAO MAINBOARD bill of materials (BOM)
12 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Module_XIAO-ESP32S3 | SeeedStudio_XIAO_ESP32S3 | M1 |
| 1 | PinHeader_01x08_P2.54mm_Vertical_THT_D1mm | PinHeader_01x08_P2.54mm_Vertical_THT_D1mm | J1 |
| 1 | HX PZ2.54-1x10P WT HX PZ2.54-1X10P WT hanxia(韩下) | HDR-SMD_10P-P2.54-H-M-W13.3-N | H2 |
| 3 | IRLZ44N | TO-220-3_Vertical | solenoid1, solenoid2, solenoid3 |
| 3 | 1K | R_1206 | R1, R2, R3 |
| 3 | 10K | R_1206 | R4, R5, R6 |
V2 XIAO MAINBOARD design files
The KiCad project lives in the NB6RULES/Nadec-Biju-Fabacademy-Files repository on GitHub; these links point at the commit this page was built from.
V2 XIAO MAINBOARD: common questions
What microcontroller does the V2 XIAO MAINBOARD use?
The V2 XIAO MAINBOARD is built around the Module_XIAO-ESP32S3, from the ESP32 family.
How big is the V2 XIAO MAINBOARD PCB?
The V2 XIAO MAINBOARD measures 90.3 × 40.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the V2 XIAO MAINBOARD?
12 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the V2 XIAO MAINBOARD design files?
From the NB6RULES/Nadec-Biju-Fabacademy-Files repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the V2 XIAO MAINBOARD design in my own project?
The repository has no license, so all rights stay with NB6RULES. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the V2 XIAO MAINBOARD without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Nadec-Biju-Fabacademy-Files
ESP32Output devices
130.2 × 52 mm34 parts2LNo license0
ESP32Stepper tester
102.5 × 39.5 mm29 parts2LNo license0
RP2040/RP2350Gameboy less goiii
50 × 76 mm22 parts2LNo license0
Microchip SAMSamd
75 × 50 mm21 parts2LNo license0
V3xiao sister
194.5 × 48.5 mm19 parts2LNo license0
ESP32V1 XIAO MAINBOARD
91.3 × 59 mm14 parts2LNo license0
AVR/ArduinoUsb bracelet
204 × 26.5 mm14 parts2LNo license0
ESP32XIAO MAINBOARD
78 × 46 mm13 parts2LNo license0
ESP32MILLED XIAO MAINBOARD
74.8 × 46 mm13 parts2LNo license0
AVR/ArduinoMcu gesture control board
35.5 × 30.5 mm12 parts2LNo license0
RISC-VNeo switch CH32V003J4M6
30.3 × 28.8 mm7 parts2LNo license0
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k