Brushed esc

neilgibsonpinto-art·Brushed-esc

Brushed esc PCB layout, top view — open source ESP32 board by neilgibsonpinto-art

About the Brushed esc PCB

Brushed esc is an open source ESP32 PCB design by neilgibsonpinto-art, published on GitHub under the MIT license. It is a 2-layer board measuring 55 × 45 mm, with 53 components from 25 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the VNH7070BASTR, AMS1117-3.3 and AP63205WU-7. By type, the board carries 17 capacitors, 17 resistors, 5 ICs, 5 connectors, 4 diodes and 3 switches.

It belongs with the iot & wireless, power & battery and robotics & motion designs in this gallery.

From the project

STMESC is an open-source, high-power dual-channel electronic speed controller designed to drive two DC brushed motors independently (up to 15 A per channel) from a 3S to 6S LiPo battery (9.0 V – 25.2 V).

STMESC is an open-source, high-power dual-channel electronic speed controller designed to drive two DC brushed motors independently (up to 15 A per channel) from a 3S to 6S LiPo battery (9.0 V – 25.2 V).

Powered by a 240 MHz dual-core ESP32, the STMESC features Tri-Mode Hybrid Control (Bluetooth LE, Wi-Fi, and standard hobby RC), onboard reverse polarity protection, real-time current sensing with stall detection, and an integrated 5 V / 2 A switching BEC. It is ideally suited for combat robotics, differential-drive rovers, smart RC models, and automation platforms.

Brushed esc, from the project README
From the project README

Main components on the Brushed esc

Brushed esc bill of materials (BOM)

53 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
VNH7070BASTR
U1, U2
1
ESP32-WROOM-32E
U3
1
AMS1117-3.3
U5
1
AP63205WU-7
U6
1
IRFR5305
Q2
3
CONN_01X02
Conn_01x02
J2, J3, J5
1
CONN_01X06
Conn_01x06
J4
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
J6
3
SW_Push
SW1, SW2, SW3
3
LED
D1, D4, D5
1
(15V Zener)
D3
1
4.7UH
4.7uH
L1
2
270uF 35V
C1, C2
2
100nF 50V
C3, C4
3
22UF
22uF
C7, C21, C22
3
100NF
100nf
C8, C12, C20
1
1UF
1uF
C9
2
10NF
10nF
C10, C11
1
22UF/35V
22uf/35v
C13
2
10UF
10uf
C14, C15
Show 5 more
QtyPartRefs
1
0.1UF
0.1uf
C16
10
1k
R1, R4, R5, R6, R7, R10, R11, R12 +2
4
10K
10k
R2, R3, R9, R14
2
1k 1%
R8, R13
1
100K
R17

Brushed esc design files

The KiCad project lives in the neilgibsonpinto-art/Brushed-esc repository on GitHub; these links point at the commit this page was built from.

Brushed esc: common questions

What microcontroller does the Brushed esc use?

The Brushed esc is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the Brushed esc PCB?

The Brushed esc measures 55 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Brushed esc?

53 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Brushed esc design files?

From the neilgibsonpinto-art/Brushed-esc repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Brushed esc design in my own project?

Yes, under the terms of its MIT license, which neilgibsonpinto-art chose for the repository.

Can I test firmware for the Brushed esc without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards