GreenFoxBoard

Neofoxx·GreenFoxBoard·HW/GreenFox/GreenFox.kicad_pcb

GreenFoxBoard PCB layout, top view — open source PIC board by Neofoxx

About the GreenFoxBoard PCB

GreenFoxBoard is an open source PIC PCB design by Neofoxx, published on GitHub. It is a 2-layer board measuring 20.3 × 46.4 mm, with 38 components from 20 distinct parts.

Its main chip is the PIC32MM0256GPM036-IM2, from the PIC family. Other key parts include the LN1134-3.3V and SRV05-4. By type, the board carries 8 resistors, 7 capacitors, 4 connectors, 3 ICs, 3 diodes and 2 crystals.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A PIC32MM dev/breakout board

The idea is to have a board, that can be quickly used with the open-source toolchain for PIC32s.

The feature list is as follows: - PIC32MM0256GPM036-I/M2, 2.0V to 3.6V, 25MHz max., 256kB flash, 32kB RAM - USB-C connector - ESD protection on USB pins - Two LEDs, one Power, one User - Two buttons, one Reset, one User - Components only on one side - Fits into 28-pin DIP socket (wide) - Breakaway section on the PCB, with a JTAG+UART connector for easy programming - Pin markings on both top and bottom

GreenFoxBoard, from the project README
From the project README

Main components on the GreenFoxBoard

LN1134-3.3VSRV05-4PIC32MM0256GPM036-IM2

GreenFoxBoard bill of materials (BOM)

38 components, 20 distinct parts.

QtyPartRefs
1
LN1134-3.3V
U1
1
SRV05-4
U2
1
PIC32MM0256GPM036-IM2
U3
1
8MHz
Y1
1
32.768kHz
Y2
1
USB_C_Receptacle_USB2.0
J1
1
Conn_02x05_Odd_Even
J2
2
Conn_01x14
J3, J5
9
MB_0.5mm
H1, H2, H3, H4, H5, H6, H7, H8 +1
2
SW_Push
SW1, SW2
1
D_Schottky
D1
2
LED
D2, D3
2
4.7uF
C1, C4
2
27pF
C3, C6
2
100nF
C5, C8
1
10uF
C7
3
10k
R1, R8, R9
2
5k1
R2, R3
2
DNS
R4, R5
1
100R
R7

GreenFoxBoard design files

The KiCad project lives in the Neofoxx/GreenFoxBoard repository on GitHub; these links point at the commit this page was built from.

GreenFoxBoard: common questions

What microcontroller does the GreenFoxBoard use?

The GreenFoxBoard is built around the PIC32MM0256GPM036-IM2, from the PIC family.

How big is the GreenFoxBoard PCB?

The GreenFoxBoard measures 20.3 × 46.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GreenFoxBoard?

38 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the GreenFoxBoard design files?

From the Neofoxx/GreenFoxBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the GreenFoxBoard design in my own project?

The repository has no license, so all rights stay with Neofoxx. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the GreenFoxBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards