TUSS4470 shield
About the TUSS4470 shield
TUSS4470 shield is an open source PCB design by Neumi, published on GitHub. It is a 2-layer board measuring 69 × 53.8 mm, with 38 components from 35 distinct parts.
Other key parts include the TUSS4470TRTJR and LM2733XMF. By type, the board carries 17 capacitors, 9 resistors, 5 diodes, 3 connectors, 2 ICs and 1 switch.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
Main components on the TUSS4470 shield
TUSS4470 shield bill of materials (BOM)
38 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TUSS4470TRTJR | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U1 |
| 1 | LM2733XMF | SOT-23-5 | U2 |
| 1 | TRANSDUCER | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | C49257 vINN SELECT | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | TRANSDUCER | TerminalBlock_4Ucon_1x03_P3.50mm_Horizontal | J9 |
| 1 | C318884 RST | SW_Push_1P1T_NO_CK_KSC7xxJ | SW1 |
| 1 | SMAJ36A | D_SMA | D1 |
| 1 | C84256 LED_PWR | LED_0805_2012Metric | D2 |
| 2 | PMEG6010ELR | Nexperia_CFP3_SOD-123W | D3, D5 |
| 1 | C84256 LED_VPWR | LED_0805_2012Metric | D4 |
| 1 | C16218 L | L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | C1671 47pF 50V | R_0603_1608Metric | C1 |
| 1 | C13585 10uF 50V X5R | C_1206_3216Metric | C2 |
| 2 | C29823 4.7uF 50V X7R | C_1206_3216Metric | C3, C4 |
| 1 | C1664 40V, 330pF | C_0603_1608Metric | C5 |
| 1 | C50254 40V, 2µF | C_1206_3216Metric | C6 |
| 2 | C14663 50V, 100nF | C_0603_1608Metric | C7, C9 |
| 1 | 10NF 10nF | C_0603_1608Metric | C8 |
| 1 | 1NF 1nF | C_0603_1608Metric | C11 |
| 1 | C15NF C15nF | C_0603_1608Metric | C12 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C3.2NF C3.2nF | C_0603_1608Metric | C13 |
| 1 | 8.2NF 8.2nF | C_0603_1608Metric | C14 |
| 1 | C106NF C106nF | C_0603_1608Metric | C15 |
| 1 | C21.2NF C21.2nF | C_0603_1608Metric | C16 |
| 1 | 680PF 680pF | C_0603_1608Metric | C17 |
| 1 | 4.7NF 4.7nF | C_0603_1608Metric | C18 |
| 1 | R10 | R_1206_3216Metric | R1 |
| 1 | R200 | R_1206_3216Metric | R2 |
| 1 | R330 | R_0603_1608Metric | R3 |
| 1 | 374K 374k | R_0603_1608Metric | R4 |
| 1 | R2.2K R2.2k | R_0603_1608Metric | R5 |
| 1 | 0OHM | R_0805_2012Metric | R6 |
| 1 | 13.7K 13.7k | R_0603_1608Metric | R7 |
| 1 | 75K 75k | R_0603_1608Metric | R8 |
| 1 | 10K 10k | R_0603_1608Metric | R9 |
TUSS4470 shield design files
The KiCad project lives in the Neumi/open_echo repository on GitHub; these links point at the commit this page was built from.
TUSS4470 shield: common questions
How big is the TUSS4470 shield?
The TUSS4470 shield measures 69 × 53.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TUSS4470 shield?
38 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TUSS4470 shield design files?
From the Neumi/open_echo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TUSS4470 shield design in my own project?
The repository has no license, so all rights stay with Neumi. Use it as a reference, and ask the author before reusing the design.
More boards in open_echo
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k