Usb1
neuroidss·FreeEEG32-alpha1.5·KiCAD/usb1.kicad_pcb
About the Usb1 PCB
Usb1 is an open source STM32 PCB design by neuroidss, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 99.1 × 99.1 mm, with 185 components from 27 distinct parts.
Its main chip is the STM32F765ZITX, from the STM32 family. Other key parts include the AD7779, LP5907, ADR4525, FXO-SM7_OSC-SMD7050_SHORT and LSM6DS3. By type, the board carries 122 capacitors, 44 connectors, 16 ICs, 2 diodes and 1 transformer.
From the project
4xAD7771BCPZ 64 kSPS, ADR4525BRZ 2.5V REF +-0.02%, STM32H743ZIT6 MCU 1027 DMIPS

Main components on the Usb1
Usb1 bill of materials (BOM)
185 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | AD7779 | QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm_ThermalVias | U1, U2, U3, U4 |
| 3 | LP5907 | SOT-23-5 | U5, U6, U10 |
| 1 | ADR4525 | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | FXO-SM7_OSC-SMD7050_SHORT FXO-SM7_OSC-SMD7050_short | Oscillator_SMD_EuroQuartz_XO91-4Pin_7.0x5.0mm_HandSoldering | U8 |
| 1 | STM32F765ZITX STM32F765ZITx | LQFP-144_20x20mm_P0.5mm | U9 |
| 1 | LSM6DS3 | Bosch_LGA-14_3x2.5mm_P0.5mm | U11 |
| 1 | SN6505A | SOT-23-6_Handsoldering | U12 |
| 1 | 473521001 | 473521001 | U13 |
| 3 | ISO7341c | SOIC-16W_7.5x10.3mm_P1.27mm | U14, U15, U16 |
| 16 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8 +8 |
| 8 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J17, J18, J19, J20, J29, J30, J32, J33 |
| 5 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J21, J22, J31, J34, J38 |
| 4 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J23, J24, J35, J36 |
| 4 | Conn_02x18_Odd_Even | PinHeader_2x18_P2.54mm_Vertical | J25, J26, J27, J28 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J37 |
| 6 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J39, J40, J41, J42, J43, J44 |
| 1 | DA2303 da2303 | SMT Power Transformer | T1 |
| 2 | D_Schottky | SOD−123 | D1, D2 |
| 58 | 100N 100n | C_0402_1005Metric | C1, C3, C7, C9, C11, C13, C14, C15 +50 |
| 28 | 1u | C_0402_1005Metric | C2, C4, C8, C10, C12, C16, C21, C23 +20 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 100N 100n | C_0603_1608Metric | C5, C17, C26, C38, C47, C59, C68, C80 +1 |
| 8 | 1u | C_0603_1608Metric | C6, C18, C27, C39, C48, C60, C69, C81 |
| 8 | 2.2U 2.2u | C_0603_1608Metric | C85, C86, C87, C88, C100, C104, C109, C110 |
| 1 | 22U 22u | C_0805_2012Metric | C90 |
| 3 | 10U 10u | C_0603_1608Metric | C92, C113, C115 |
| 6 | 100n | C_0402_1005Metric | C116, C117, C118, C119, C120, C121 |
| 1 | 4.7U 4.7u | C_0603_1608Metric | C122 |
Usb1 design files
The KiCad project lives in the neuroidss/FreeEEG32-alpha1.5 repository on GitHub; these links point at the commit this page was built from.
Usb1: common questions
What microcontroller does the Usb1 use?
The Usb1 is built around the STM32F765ZITX, from the STM32 family.
How big is the Usb1 PCB?
The Usb1 measures 99.1 × 99.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb1?
185 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb1 design files?
From the neuroidss/FreeEEG32-alpha1.5 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Usb1 design in my own project?
Yes, under the terms of its AGPL-3.0 license, which neuroidss chose for the repository.
Can I test firmware for the Usb1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in FreeEEG32-alpha1.5
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k