11 open source boards using the ADR4525
Real designs built with the ADR4525, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Analog i
deimoscontrols
223 × 95 mm568 parts4LNo license43ESP8266
FreeEEG32
neuroidss
69.8 × 69.8 mm213 parts4LAGPL-3.039STM32
FreeEEG32-alpha1.5
neuroidss
70 × 70 mm192 parts4LAGPL-3.024ESP32
FreeEEG32-alpha2
neuroidss
66 × 76.2 mm202 parts4LAGPL-3.00NXP
Temperature controller
iams-yb-lab
163 × 100 mm108 parts4LNo license0- schematic only · 65 partsNXP
Open source potentiostat
samueloblenes
65 partsCERN-OHL-S-2.00 STM32
Usb
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Stm32h7 base
deimoscontrols
80.7 × 74.5 mm191 parts4LNo license43STM32
Usb1
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Usb2
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024STM32
Usb3
neuroidss
99.1 × 99.1 mm185 parts2LAGPL-3.024
How designs wire the ADR4525
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ADR4525 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to AVDD on 3 of 5 designs (a signal on 2).
- The OUT pin is tied to 2.5V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 3, 5, 7, 8 | Connected to: Not connected 100% | — |
| INpin 2 | Connected to: AVDD 60% · a signal 40% | — |
| GNDpin 4 | Connected to: GND 60% · a signal 40% | — |
| OUTpin 6 | Connected to: 2.5V 60% · a signal 40% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Analog i by deimoscontrols, FreeEEG32 by neuroidss, FreeEEG32-alpha1.5 by neuroidss and Temperature controller by iams-yb-lab.
The ADR4525 in open source designs
The gallery holds 11 open source boards using the ADR4525 from 6 GitHub repositories; a typical one measures about 99.1 × 97 mm and carries around 185 components.
60% use four copper layers or more, and 73% carry an open source license.
The most starred is Analog i by deimoscontrols.
Parts used alongside the ADR4525
What boards using the ADR4525 are built for
ADR4525: common questions
Where can I find a ADR4525 reference design?
Each of the 11 boards on this page is a real design using the ADR4525. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADR4525 IN pin connected?
The IN pin is tied to AVDD on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the ADR4525.
How is the ADR4525 OUT pin connected?
The OUT pin is tied to 2.5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the ADR4525.
What parts are used alongside the ADR4525?
The 473521001, ADUM1402BRWZ, LSM6DS3, 8.192MHz and AD7770 appear in the most repositories here.
Which microcontrollers do boards using the ADR4525 use?
Most are built on STM32 (7), NXP (2), ESP32 (1) and ESP8266 (1).
How big is a typical board using the ADR4525?
The median is 99.1 × 97 mm, and 40% are two-layer designs.
What is the most popular open source board using the ADR4525?
By GitHub stars, Analog i by deimoscontrols, with 43 stars.
Can I simulate one of these boards using the ADR4525 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.