HeatPad-Controller
Neurotech-Hub·HeatPad-Controller·KiCAD/Heat_Pad_v1.0/Heat_Pad_v1.0.kicad_pcb
About the HeatPad-Controller PCB
HeatPad-Controller is an open source PCB design by Neurotech-Hub, published on GitHub. It is a 2-layer board measuring 59.4 × 22.9 mm, with 9 components from 8 distinct parts.
Other key parts include the 2890 Pololu and Adafruit_Feather_ESP32-S3. By type, the board carries 2 crystals, 2 resistors, 1 IC, 1 module, 1 connector and 1 switch.
It belongs with the power & battery and sensors designs in this gallery.
From the project
Battery-powered pad that warms up when someone stands close. The thermo-graphics visible once the pad is warm, and disappears again as the pad cools.
Battery-powered pad that warms up when someone stands close. The thermo-graphics visible once the pad is warm, and disappears again as the pad cools.
The controller is an Adafruit ESP32-S3 TFT Feather. It reads a time-of-flight distance sensor, turns a boost converter on and off to feed the heat pad, and draws the live distance, battery level, and heart on its screen. There is no temperature sensor. Timing stands in for how hot the pad is.

Main components on the HeatPad-Controller
HeatPad-Controller bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2890 Pololu | u3v70x_Pololu | U1 |
| 1 | Adafruit_Feather_ESP32-S3 | Adafruit_Feather_ESP32-S3 | A1 |
| 2 | JSTPH | X5_JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | X5, X6 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J1 |
| 1 | EG1218_Slide_Switch | SW_EG1218 | S1 |
| 1 | LED | LED_1206_3216Metric | D2 |
| 1 | 1k | R_0603_1608Metric | R40 |
| 1 | 10k | R_0603_1608Metric | R42 |
HeatPad-Controller design files
The KiCad project lives in the Neurotech-Hub/HeatPad-Controller repository on GitHub; these links point at the commit this page was built from.
HeatPad-Controller: common questions
How big is the HeatPad-Controller PCB?
The HeatPad-Controller measures 59.4 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HeatPad-Controller?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the HeatPad-Controller design files?
From the Neurotech-Hub/HeatPad-Controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HeatPad-Controller design in my own project?
The repository has no license, so all rights stay with Neurotech-Hub. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k