Teensy eurorack breakout

newdigate·teensy-eurorack·hardware/boards/teensy-eurorack-breakout.kicad_pcb

Teensy eurorack breakout layout, top view — open source board by newdigate

About the Teensy eurorack breakout

Teensy eurorack breakout is an open source PCB design by newdigate, published on GitHub under the MIT license. It is a 2-layer board measuring 110.5 × 111.1 mm, with 73 components from 24 distinct parts.

Other key parts include the AD5754BREZ, MCP1700-2502E, AD7606BSTZ and 6N138. By type, the board carries 26 capacitors, 8 resistors, 5 ICs, 1 connector and 1 diode.

It belongs with the audio and dev boards & breakouts designs in this gallery.

From the project

Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

Main components on the Teensy eurorack breakout

AD5754BREZ MCP1700-2502E AD7606BSTZ 6N138

Teensy eurorack breakout bill of materials (BOM)

73 components, 24 distinct parts.

Qty	Part	Footprint	Refs
2	AD5754BREZ	HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm	U2, U3
1	MCP1700-2502E	SOT-23	U5
1	AD7606BSTZ	LQFP-64_10x10mm_P0.5mm	U6
1	6N138	6N138S	U7
1	Conn_01x08	ST7735	J1
1	1734592-8	HFW8R-1STE1LF	FPC_SD1
2	Conn_01x14	PinSocket_1x14_P2.54mm_Vertical	JB1, JB2
2	Conn_01x08	PinSocket_1x08_P2.54mm_Vertical	JB3, JB4
2	Conn_01x04	PinSocket_1x04_P2.54mm_Vertical	JBUSBA1, JBUSBB1
16	AudioJack2_SwitchT	WQP-PJ301M-12_JACK	JIN1, JIN2, JIN3, JIN4, JIN5, JIN6, JIN7, JIN8 +8
2	DIN-5	OG-MIDI_SD-50BV	MIDI_IN1, MIDI_OUT1
4	R_POT	9MM_SNAP-IN_POT	RV1, RV2, RV3, RV4
1	YAMAICHI_SD_CARD	YAMAICHI_MICROSD_VERTICAL	SDCARD1
1	USB-A-S-X-X-VT	USB-A-S-X-X-VT	USBA1
1	61400413321	WURTH_ELECTRONICS_61400413321_0	USBB1
1	D	D_0805_2012Metric	D1
4	10u	CP_Radial_D5.0mm_P2.00mm	C19, C21, C33, C34
6	10u	C_0805_2012Metric	C20, C22, C27, C29, C37, C42
4	0.1u	CP_Radial_D5.0mm_P2.00mm	C23, C25, C31, C32
10	0.1u	C_0805_2012Metric	C24, C26, C28, C30, C35, C36, C38, C39 +2

Show 4 more

Qty	Part	Footprint	Refs
2	1u	C_0805_2012Metric	C43, C44
4	4.7k	R_0805_2012Metric	R1, R5, R6, R7
1	1k	R_0805_2012Metric	R2
3	220	R_0805_2012Metric	R36, R37, R38

Teensy eurorack breakout design files

The KiCad project lives in the newdigate/teensy-eurorack repository on GitHub; these links point at the commit this page was built from.

Layouthardware/boards/teensy-eurorack-breakout.kicad_pcb

Teensy eurorack breakout: common questions

How big is the Teensy eurorack breakout?

The Teensy eurorack breakout measures 110.5 × 111.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Teensy eurorack breakout?

73 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Teensy eurorack breakout design files?

From the newdigate/teensy-eurorack repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Teensy eurorack breakout design in my own project?

Yes, under the terms of its MIT license, which newdigate chose for the repository.

More boards in teensy-eurorack

Similar boards