Isoqaz

newx-it·isoqaz·pcb/isoqaz.kicad_pcb

Isoqaz PCB layout, top view — open source STM32 board by newx-it

About the Isoqaz PCB

Isoqaz is an open source STM32 PCB design by newx-it, published on GitHub. It is a 2-layer board measuring 204.8 × 80.4 mm, with 102 components from 12 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the PRTR5V0U2X and XC6206PXXXMR-REGULATOR_LINEAR. By type, the board carries 39 diodes, 10 capacitors, 4 resistors, 3 ICs, 1 connector and 1 fuse.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

for kyo

This is based on a Kicad Template project (that also happens to be a dev-board) for the STM32F072CBT6.

*I used this video for turning this template into a BlackPill-compatible dev board:* https://youtu.be/LvX-Us9VZM0

Main components on the Isoqaz

Isoqaz bill of materials (BOM)

102 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F072CBT6
U1
1
PRTR5V0U2X
U2
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
2
C318884
SW_SPST
BOOT1, RST1
1
500MA
500mA
F1
42
CPG151101S11-16
MX_SW_HS
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +34
39
C81598
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +31
7
100NF
100nF
C1, C3, C4, C5, C6, C7, C8
1
10UF
10uF
C2
2
1UF
1uF
C9, C10
4
5.1K
5.1k
R1, R2, R3, R4

Isoqaz design files

The KiCad project lives in the newx-it/isoqaz repository on GitHub; these links point at the commit this page was built from.

Isoqaz: common questions

What microcontroller does the Isoqaz use?

The Isoqaz is built around the STM32F072CBT6, from the STM32 family.

How big is the Isoqaz PCB?

The Isoqaz measures 204.8 × 80.4 mm, has 2 copper layers and is 1.2 mm thick.

How many components are on the Isoqaz?

102 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Isoqaz design files?

From the newx-it/isoqaz repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Isoqaz design in my own project?

The repository has no license, so all rights stay with newx-it. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Isoqaz without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards