Adafruit I2S Mic SPK0415HM4H
NgHdc·Ntex·Adafruit-I2S-Microphone-Breakout-PCB/Adafruit I2S Mic SPK0415HM4H.kicad_pcb
About the Adafruit I2S Mic SPK0415HM4H PCB
Adafruit I2S Mic SPK0415HM4H is an open source PCB design by NgHdc, published on GitHub. It is a 2-layer board measuring 16.5 × 12.7 mm, with 8 components from 8 distinct parts.
Other key parts include the MIC_I2S_SPH0645. By type, the board carries 3 ICs, 2 capacitors, 2 resistors and 1 jumper.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
PCB files for the Adafruit I2S Microphone Breakout. Format is EagleCAD schematic and board layout * https://www.adafruit.com/products/3421
PCB files for the Adafruit I2S Microphone Breakout. Format is EagleCAD schematic and board layout * https://www.adafruit.com/products/3421
Listen to this good news - we now have a breakout board for a super tiny I2S MEMS microphone. Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they're way smaller and thinner. This microphone doesn't even have analog out, its purely digital. The I2S is a small, low cost MEMS mic with a range of about 50Hz - 15KHz, good for just about all general audio recording/detection.

Main components on the Adafruit I2S Mic SPK0415HM4H
Adafruit I2S Mic SPK0415HM4H bill of materials (BOM)
8 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MIC_I2S_SPH0645 | SPH0645LM4H | IC1 |
| 1 | — | ADAFRUIT_3.5MM | U$5 |
| 1 | — | PCBFEAT-REV-040 | U$13 |
| 1 | — | 1X06_ROUND | JP2 |
| 1 | 220pF | 0805-NO | C2 |
| 1 | 1uF | 0805-NO | C4 |
| 1 | 68 | 0603-NO | R1 |
| 1 | 10k | 0603-NO | R2 |
Adafruit I2S Mic SPK0415HM4H design files
The KiCad project lives in the NgHdc/Ntex repository on GitHub; these links point at the commit this page was built from.
Adafruit I2S Mic SPK0415HM4H: common questions
How big is the Adafruit I2S Mic SPK0415HM4H PCB?
The Adafruit I2S Mic SPK0415HM4H measures 16.5 × 12.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit I2S Mic SPK0415HM4H?
8 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit I2S Mic SPK0415HM4H design files?
From the NgHdc/Ntex repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit I2S Mic SPK0415HM4H design in my own project?
The repository has no license, so all rights stay with NgHdc. Use it as a reference, and ask the author before reusing the design.
More boards in Ntex
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k