Festitracker
nickzentmayer·Festival-Trackers·KiCad/festitracker/festitracker.kicad_pcb
About the Festitracker PCB
Festitracker is an open source ESP32 PCB design by nickzentmayer, published on GitHub. It is a 4-layer board measuring 65 × 67.5 mm, with 28 components from 26 distinct parts.
Its main chip is the ESP32-S3N8, from the ESP32 family. Other key parts include the AZ1117-3.3. By type, the board carries 16 capacitors, 6 inductors, 2 ICs, 2 resistors and 1 transistor.
Main components on the Festitracker
Festitracker bill of materials (BOM)
28 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3N8 SX1262IMLTRT | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | AZ1117-3.3 PE4259 | SOT65P215X110-6N | U2 |
| 1 | 32.0MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Q1_Xtal1 |
| 1 | SMA | U.FL_Molex_MCRF_73412-0110_Vertical | RFIO1 |
| 1 | 2.4NH 47nH | L_0402_1005Metric | L1 |
| 1 | 47NH 2.5nH | L_0402_1005Metric | L3 |
| 1 | 15UH 4.7nH | L_0402_1005Metric | L4 |
| 1 | 47NH 9.1nH | L_0402_1005Metric | L5 |
| 1 | 15nH | L_0402_1005Metric | L6 |
| 1 | 15uH | L_0402_1005Metric | L7 |
| 1 | 10PF 47nF | C_0402_1005Metric | C1 |
| 1 | 2.4PF 47pF | C_0402_1005Metric | C2 |
| 1 | 2.7PF 3pF | C_0402_1005Metric | C4 |
| 1 | 10PF 5.6pF | C_0402_1005Metric | C5 |
| 1 | 10UF 39pF | C_0402_1005Metric | C6 |
| 1 | 100NF 1.8pF | C_0402_1005Metric | C7 |
| 1 | 100NF 39pF | C_0402_1005Metric | C8 |
| 2 | 100NF 3.3pF | C_0402_1005Metric | C9, C10 |
| 1 | 100NF 2.4pF | C_0402_1005Metric | C11 |
| 1 | 10UF 1.8pF | C_0402_1005Metric | C12 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 22UF 1nF | C_0402_1005Metric | C14 |
| 1 | 10UF 1nF | C_0402_1005Metric | C15 |
| 1 | 100NF 1uF | C_0402_1005Metric | C16 |
| 1 | 1UF 470nF | C_0402_1005Metric | C17 |
| 1 | 100NF 100nF | C_0402_1005Metric | C18 |
| 2 | 200K 100R | R_0402_1005Metric | R3, R4 |
Festitracker design files
The KiCad project lives in the nickzentmayer/Festival-Trackers repository on GitHub; these links point at the commit this page was built from.
Festitracker: common questions
What microcontroller does the Festitracker use?
The Festitracker is built around the ESP32-S3N8, from the ESP32 family.
How big is the Festitracker PCB?
The Festitracker measures 65 × 67.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Festitracker?
28 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Festitracker design files?
From the nickzentmayer/Festival-Trackers repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Festitracker design in my own project?
The repository has no license, so all rights stay with nickzentmayer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Festitracker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Festival-Trackers
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k