Esp32s3
nickzentmayer·Festival-Trackers·pcb/esp32s3/esp32s3.kicad_pcb
About the Esp32s3 PCB
Esp32s3 is an open source ESP32 PCB design by nickzentmayer, published on GitHub. It is a 4-layer board measuring 59.7 × 58.9 mm, with 83 components from 52 distinct parts.
Its main chip is the ESP32-S3N8, from the ESP32 family. Other key parts include the AZ1117-3.3, USBLC6-2SC6, MCP73831-2-OT, 24AA32AF-I/MS and SX1262IMLTRT. By type, the board carries 29 capacitors, 22 resistors, 12 ICs, 5 connectors, 5 inductors and 2 transistors.
Main components on the Esp32s3
Esp32s3 bill of materials (BOM)
83 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3N8 | QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | MCP73831-2-OT | SOT-23-5 | U4 |
| 1 | 24AA32AF-I/MS 24AA32AF-I_MS | SOP65P490X110-8N | U5 |
| 1 | SX1262IMLTRT | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U6 |
| 1 | DMG3415U-7 | SOT95P240X105-3N | U7 |
| 1 | LSM303AGR | PQFN50P200X200X100-12N | U8 |
| 1 | 2450AT18D0100E | 2450AT18D0100E_JOT | U9 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U10 |
| 1 | TCA9539RGER | RGE0024B | U11 |
| 1 | BGS12SN6E6327XTSA1 | TSNP-6-2&slash_-8_INF | U12 |
| 1 | 32.0MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Q1_Xtal1 |
| 1 | DMG1012T | SOT-523 | Q3 |
| 1 | 40MHZ 40MHz | XTAL_ABM10-40.000MHZ-D30-T3 | X1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | Battery | 2 Wire Pads | J2 |
| 1 | GPS_ANT | U.FL_Molex_MCRF_73412-0110_Vertical | J3 |
| 1 | Conn_Coaxial | U.FL_Molex_MCRF_73412-0110_Vertical | J4 |
| 1 | CONN_01X40_SOCKET Conn_01x40_Socket | Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J5 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | ATGM336H | ATGM336H1 |
| 1 | MS421R | MSR421R | BT1 |
| 1 | 0900FM15K0039 | Balun_Johanson_0900FM15K0039 | FL1 |
| 1 | BOOT | vert_button_6mm | SW1 |
| 1 | PTS815 SJM 250 SMTR LFS | SW4_PTS815 SJM 250 SMTR LFS_CNK | SW2 |
| 2 | MBR0540 | D_SOD-123 | D1, D2 |
| 1 | 2.4NH 2.4nH | L_0402_1005Metric | L1 |
| 1 | 2.2NH 2.2nH | L_0402_1005Metric | L2 |
| 2 | 47NH 47nH | L_0402_1005Metric | L3, L5 |
| 1 | 15UH 15uH | L_0805_2012Metric | L4 |
| 2 | 10PF 10pF | C_0402_1005Metric | C1, C5 |
| 1 | 2.4PF 2.4pF | C_0402_1005Metric | C2 |
| 11 | 100NF 100nF | C_0402_1005Metric | C3, C7, C8, C9, C10, C11, C16, C18 +3 |
| 1 | 2.7PF 2.7pF | C_0402_1005Metric | C4 |
| 4 | 10UF 10uF | C_0402_1005Metric | C6, C12, C13, C15 |
| 1 | 22UF 22uF | C_0402_1005Metric | C14 |
| 1 | 1UF 1uF | C_0402_1005Metric | C17 |
| 1 | 39PF 39pF | C_0402_1005Metric | C19 |
| 1 | 47NF 47nF | C_0402_1005Metric | C20 |
| 1 | 470NF 470nF | C_0402_1005Metric | C21 |
| 1 | 47PF 47pF | C_0402_1005Metric | C23 |
| 1 | 100nF | C_0402_1005Metric | C26 |
| 2 | 1NF 1nF | C_0402_1005Metric | C31, C32 |
| 1 | 220NF 220nF | C_0402_1005Metric | C33 |
| 7 | 10K | R_0402_1005Metric | R1, R14, R15, R16, R17, R19, R22 |
| 5 | 5.1K 5.1k | R_0402_1005Metric | R2, R6, R7, R8, R24 |
| 4 | 200K 200k | R_0402_1005Metric | R3, R4, R10, R11 |
| 1 | 100 | R_0402_1005Metric | R5 |
| 1 | 100K 100k | R_0402_1005Metric | R9 |
| 2 | 100R | R_0402_1005Metric | R12, R13 |
| 1 | 22 | R_0402_1005Metric | R18 |
| 1 | 10 | R_0402_1005Metric | R23 |
Esp32s3 design files
The KiCad project lives in the nickzentmayer/Festival-Trackers repository on GitHub; these links point at the commit this page was built from.
Esp32s3: common questions
What microcontroller does the Esp32s3 use?
The Esp32s3 is built around the ESP32-S3N8, from the ESP32 family.
How big is the Esp32s3 PCB?
The Esp32s3 measures 59.7 × 58.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32s3?
83 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32s3 design files?
From the nickzentmayer/Festival-Trackers repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32s3 design in my own project?
The repository has no license, so all rights stay with nickzentmayer. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32s3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Festival-Trackers
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k