ESP32-Clock-Gallery

nickzswammer·ESP32-Clock-Gallery·PCB/ESP32_Clock_Gallery.kicad_pcb

ESP32-Clock-Gallery PCB layout, top view — open source board by nickzswammer

About the ESP32-Clock-Gallery PCB

ESP32-Clock-Gallery is an open source PCB design by nickzswammer, published on GitHub. It is a 2-layer board measuring 86.8 × 63 mm, with 43 components from 21 distinct parts.

Other key parts include the TPS63060, TP4056 and MAX17048G_T10. By type, the board carries 17 capacitors, 14 resistors, 4 switches, 3 ICs, 1 transistor and 1 connector.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

PCB & Firmware for an ESP32 Based E Paper Clock/ Gallery

A customizable ESP32-based image clock gallery project, combining Arduino firmware, Python scripting, electronics, and PCB design. This project allows users to upload images via a web interface, convert them to a binary format suitable for display on a clock-style device, and manage them on the ESP32.

- Embedded / Microcontroller: - ESP32 main controller - Real-Time Clock (RTC) module for accurate timekeeping - Pushbutton controls for menu and navigation - SPI and I²C interfaces for peripheral communication

ESP32-Clock-Gallery, from the project README
From the project README

Main components on the ESP32-Clock-Gallery

ESP32-Clock-Gallery bill of materials (BOM)

43 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS63060
U1
1
TP4056
U2
1
MAX17048G_T10
U3
1
PMOS
Q1
1
B8B-PH-K-S_LF__SN_
J2
1
3.7V 1500mAh LiPo
BT1
1
B5819W-TP
CR1
4
DB301V-3.5-2P-GN-S
SW1, SW2, SW3, SW4
1
1.2 uH
L1
12
10UF
10uF
C1, C2, C4, C8, C9, C10, C11, C12 +4
4
0.1UF
0.1uF
C3, C5, C7, C15
1
2.2PF
2.2pF
C6
2
5.1K
R1, R2
2
100K
R3, R6
2
1K
R4, R5
1
360K
R7
1
64.9K
R8
1
1.5K
R9
2
10K
R10, R12
1
470
R11
Show 1 more
QtyPartRefs
2
4.7K
R13, R14

ESP32-Clock-Gallery design files

The KiCad project lives in the nickzswammer/ESP32-Clock-Gallery repository on GitHub; these links point at the commit this page was built from.

ESP32-Clock-Gallery: common questions

How big is the ESP32-Clock-Gallery PCB?

The ESP32-Clock-Gallery measures 86.8 × 63 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-Clock-Gallery?

43 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-Clock-Gallery design files?

From the nickzswammer/ESP32-Clock-Gallery repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-Clock-Gallery design in my own project?

The repository has no license, so all rights stay with nickzswammer. Use it as a reference, and ask the author before reusing the design.

Similar boards