23 open source boards using the MAX17048G_T10
Real designs built with the MAX17048G_T10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Triangulate-ES 01-Watch
sandgum
82.8 × 33 mm125 parts4LNo license22ESP32
Nomad
0Zane
65 × 120 mm69 parts2LMIT15RP2040/RP2350
Mp3-player
espcaa
52 × 115.8 mm141 parts4LCustom license5ESP32
CheetoPet
Cheet0sDelet0s
50.2 × 95.2 mm96 parts2LGPL-2.03ESP32
DC-34-Badge
Cyber-Professionals-Enthusiast-Club
145.2 × 203.4 mm87 parts2LNo license3ESP32
GridWatcher
kylerichter36-coder
113.4 × 69.2 mm79 parts2LNo license3ESP32
NX-ISD
Ghost3379
77 × 48.6 mm108 parts4LGPL-3.02Power Management Unit Tesi
EmaNeg
50 × 50 mm49 parts2LMIT1STM32
X-Watch
Han-ZenX
36 × 36 mm118 parts2LMIT0ESP32
Hardware
Capibator
101.5 × 64.4 mm108 parts2LNo license0Raspberry Pi
Gbczero
hahhen
71.4 × 128 mm78 parts2LNo license0ESP32
Digital-B-Card
AhmedMKAlzoubi
100 × 60 mm62 parts2LNo license0ESP32
Joystick
grimlokason
220 × 210 mm57 parts2LNo license0BPV4 Collar
rees3901
50 × 25 mm51 parts2LNo license0POWER SUPPLY FOR MOBILE DEVICES
SzymonGogulski
100 × 40 mm49 parts2LNo license0ESP32-Clock-Gallery
nickzswammer
86.8 × 63 mm43 parts2LNo license0Battery-Featherwing
mousethief
23.4 × 51.3 mm37 parts2LNo license0Nordic nRF
ArrythmiX
TTF-fog
39.5 × 28.5 mm37 parts4LNo license0U pen
TheAbsoluteMin
130.5 × 16.8 mm24 parts4LMIT0- schematic only · 13 partsESP32
Custom bike computer
eastmohan
13 partsNo license0 ESP32
DC-34-Badge panel
Cyber-Professionals-Enthusiast-Club
460.9 × 228.8 mm87 parts2LNo license3BPV4 CollarEVAL
rees3901
100 × 50 mm51 parts2LNo license0Nordic nRF
MCU V2
kermitsgonnakermicide
63 × 28 mm9 parts2LNo license0
How designs wire the MAX17048G_T10
Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the MAX17048G_T10 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 4.7 µF).
- The CTG pin is tied to GND on 17 of 20 designs (not connected on 3).
- The SCL pin has a pull-up to 3.3V on 14 of 20 designs, most often 4.7 kΩ (then 10 kΩ).
- The SDA pin has a pull-up to 3.3V on 14 of 20 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CTGpin 1 | Connected to: GND 85% · not connected 15% | — |
| CELLpin 2 | Connected to: VBAT 65% · a signal 35% | — |
| VDDpin 3 | Connected to: VBAT 70% · a signal 30% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| ALERTpin 5 | Connected to: The microcontroller 25% · not connected 25% |
|
| QSTRTpin 6 | Connected to: GND 65% · not connected 15% · a signal 20% | — |
| SCLpin 7 | Connected to: The microcontroller 60%, a connector 20% |
|
| SDApin 8 | Connected to: The microcontroller 60%, a connector 20% |
|
| EPpin 9 | Connected to: GND 95% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Triangulate-ES 01-Watch by sandgum, Nomad by 0Zane, Mp3-player by espcaa and CheetoPet by Cheet0sDelet0s.
The MAX17048G_T10 in open source designs
The gallery holds 23 open source boards using the MAX17048G_T10 from 21 GitHub repositories; a typical one measures about 79.9 × 55.6 mm and carries around 62 components.
77% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.
The most starred is Triangulate-ES 01-Watch by sandgum.
Parts used alongside the MAX17048G_T10
Microcontrollers on boards using the MAX17048G_T10
What boards using the MAX17048G_T10 are built for
MAX17048G_T10: common questions
Where can I find a MAX17048G_T10 reference design?
Each of the 23 boards on this page is a real design using the MAX17048G_T10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MAX17048G_T10 VDD pin?
The VDD pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 20 open source designs using the MAX17048G_T10.
How is the MAX17048G_T10 CTG pin connected?
The CTG pin is tied to GND on 17 of 20 designs (not connected on 3). Counted from the KiCad layouts of 20 open source designs using the MAX17048G_T10.
What pull-up resistor is used on the MAX17048G_T10 SCL pin?
The SCL pin has a pull-up to 3.3V on 14 of 20 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 20 open source designs using the MAX17048G_T10.
What parts are used alongside the MAX17048G_T10?
The BQ24074RGT, DW01A, ESP32-S3-WROOM-1, TPS63070RNMR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the MAX17048G_T10 use?
Most are built on ESP32 (11), Nordic nRF (2), Raspberry Pi (1) and RP2040/RP2350 (1).
How big is a typical board using the MAX17048G_T10?
The median is 79.9 × 55.6 mm, and 77% are two-layer designs.
What is the most popular open source board using the MAX17048G_T10?
By GitHub stars, Triangulate-ES 01-Watch by sandgum, with 22 stars.
Can I simulate one of these boards using the MAX17048G_T10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.