Env station
Nikolaprikola·env-station
About the Env station PCB
Env station is an open source ESP32 PCB design by Nikolaprikola, published on GitHub. It is a 2-layer board measuring 50 × 45 mm, with 20 components from 11 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the AP2112K-3.3. By type, the board carries 8 resistors, 5 capacitors, 3 connectors, 2 ICs and 2 switches.
It belongs with the sensors designs in this gallery.
From the project
Dvoslojna PCB za mjerenje temperature, vlage, tlaka, CO2 i cestica. Prvi vlastiti PCB dizajn.

Main components on the Env station
Env station bill of materials (BOM)
20 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | SW_SPST_TL3342 | SW1, SW2 |
| 2 | 10u | C_0805_2012Metric | C2, C4 |
| 2 | 100n | C_0805_2012Metric | C3, C5 |
| 1 | 1u | C_0805_2012Metric | C6 |
| 2 | 5.1k | R_0805_2012Metric | R1, R2 |
| 4 | 10k | R_0805_2012Metric | R3, R4, R5, R6 |
| 2 | 4.7k | R_0805_2012Metric | R7, R8 |
Env station design files
The KiCad project lives in the Nikolaprikola/env-station repository on GitHub; these links point at the commit this page was built from.
- Layoutenv-station.kicad_pcb
- Schematicenv-station.kicad_sch
Env station: common questions
What microcontroller does the Env station use?
The Env station is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Env station PCB?
The Env station measures 50 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Env station?
20 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Env station design files?
From the Nikolaprikola/env-station repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Env station design in my own project?
The repository has no license, so all rights stay with Nikolaprikola. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Env station without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k