BMS

NishanthKiruthivasan·BMS

BMS PCB layout, top view — open source board by NishanthKiruthivasan

About the BMS PCB

BMS is an open source PCB design by NishanthKiruthivasan, published on GitHub under the MIT license. It is a 2-layer board measuring 39.3 × 55 mm, with 11 components from 10 distinct parts.

Other key parts include the MCP73831T-2ACI/OT. By type, the board carries 3 capacitors, 2 connectors, 2 diodes, 2 resistors, 1 IC and 1 fuse.

It belongs with the power & battery designs in this gallery.

From the project

A compact Li-Ion/Li-Po battery charging module based on the MCP73831 with input protection, status indication, and a clean 2-layer PCB design.

This project is a compact and reliable single-cell Li-Ion/Li-Po battery charging board using the MCP73831T-2ACI/OT linear charger IC. Designed for prototyping, IoT devices, and embedded systems requiring safe and simple battery charging from a 5V USB or adapter input.

- ✅ Input overvoltage and surge protection (TVS diode + fuse) - ✅ Single-cell Li-Ion/Li-Po battery charging (4.2V, 500 mA) - ✅ Charging status LED indicator (ON during charging, OFF when fully charged) - ✅ Clean and simple 2-layer PCB design - ✅ Output connector for system power - ✅ Mounting holes and large battery cutout for…

BMS, from the project README
From the project README

Main components on the BMS

BMS bill of materials (BOM)

11 components, 10 distinct parts.

QtyPartRefs
1
MCP73831T-2ACI/OT
MCP73831T-2ACI_OT
U1
1
Conn_01x02_Pin
CN1
1
Conn_01x02_Pin
CN2
1
Fuse
F1
1
PTVS5V0Z1USK
D1
1
CHARGING
D2
1
10uF/16V
C1
2
4.7uF/16V
C2, C3
1
2K
R1
1
470
R2

BMS design files

The KiCad project lives in the NishanthKiruthivasan/BMS repository on GitHub; these links point at the commit this page was built from.

BMS: common questions

How big is the BMS PCB?

The BMS measures 39.3 × 55 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BMS?

11 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the BMS design files?

From the NishanthKiruthivasan/BMS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BMS design in my own project?

Yes, under the terms of its MIT license, which NishanthKiruthivasan chose for the repository.

Similar boards