Unplugged djsce
nishumbh·unplugged-djsce·pcb/src/testing.kicad_pcb
About the Unplugged djsce PCB
Unplugged djsce is an open source ESP32 PCB design by nishumbh, published on GitHub. It is a 2-layer board measuring 92.5 × 61.5 mm, with 22 components from 22 distinct parts.
Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the BME280 - Pressure Humidity Sensor, DHT11 Temp Sensor, A1101ELHL Hall Effect, TP4056-42-ESOP8 - Battery Recharger and DS3231M - RTC. By type, the board carries 10 connectors, 7 ICs, 1 battery holder, 1 relay, 1 microphone and 1 LED.
It belongs with the sensors, iot & wireless and power & battery designs in this gallery.
From the project
This repository contains all resources for our hardware hackathon project that implements an IoT system for urban management.
This repository contains all resources for our hardware hackathon project that implements an IoT system for urban management.
- Source Files: pcb/src/ - KiCad Schematic - KiCad PCB Layout - Bill of Materials - Gerber Files (manufacturing files)
- Renders and Verification: pcb/output/ - Complete PCB Layout - Schematic Diagram - Top Copper Layer - Bottom Copper Layer - 3D Representation - Design Rule Check Results - Electrical Rule Check Results

Main components on the Unplugged djsce
Unplugged djsce bill of materials (BOM)
22 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 1 | BME280 - Pressure Humidity Sensor | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | DHT11 Temp Sensor | Aosong_DHT11_5.5x12.0_P2.54mm | U3 |
| 1 | A1101ELHL Hall Effect | SOT-23W | U5 |
| 1 | TP4056-42-ESOP8 - Battery Recharger | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U6 |
| 1 | DS3231M - RTC | SOIC-16W_7.5x10.3mm_P1.27mm | U7 |
| 1 | CRE1S0305S3C | Converter_DCDC_Murata_CRE1xxxxxx3C_THT | U8 |
| 1 | Conn_01x10_Pin 5V | Pin_D1.0mm_L10.0mm | J1 |
| 1 | Conn_01x10_Pin 3.3V | Pin_D1.0mm_L10.0mm | J2 |
| 1 | Conn_01x10_Pin GND | Pin_D1.0mm_L10.0mm | J3 |
| 1 | Conn_01x03_Pin Water Flow | PinHeader_1x03_P1.00mm_Vertical | J11 |
| 1 | 01x03 Flame | PinHeader_1x03_P1.00mm_Vertical | J12 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P1.00mm_Vertical | J13 |
| 1 | Conn_01x03_Pin Sound | PinHeader_1x03_P1.00mm_Vertical | J14 |
| 1 | Conn_01x04_Pin Rain | PinHeader_1x03_P1.00mm_Vertical | J15 |
| 1 | Conn_01x04_Pin Soil Humidity | PinHeader_1x04_P1.00mm_Vertical | J16 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P1.00mm_Vertical | J17 |
| 1 | Battery_Cell | BatteryHolder_Bulgin_BX0036_1xC | BT1 |
| 1 | FUJITSU_FTR-LYCA005X Fujitsu_FTR-LYCA005x | Relay_SPDT_Fujitsu_FTR-LYCA005x_FormC_Vertical | K1 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | MK1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LV25-P | LEM_LV25-P | VoltageSensorU6 |
| 1 | OLED-128O064D | OLED-128O064D | DS1 |
Unplugged djsce design files
The KiCad project lives in the nishumbh/unplugged-djsce repository on GitHub; these links point at the commit this page was built from.
Unplugged djsce: common questions
What microcontroller does the Unplugged djsce use?
The Unplugged djsce is built around the ESP32-S3-DEVKITC, from the ESP32 family.
How big is the Unplugged djsce PCB?
The Unplugged djsce measures 92.5 × 61.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Unplugged djsce?
22 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Unplugged djsce design files?
From the nishumbh/unplugged-djsce repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Unplugged djsce design in my own project?
The repository has no license, so all rights stay with nishumbh. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Unplugged djsce without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k