HardLabs

Pcb

NixVegas·pcb·kicad/nixos.kicad_pcb

Pcb layout, top view — open source ESP32 board by NixVegas

About the Pcb

Pcb is an open source ESP32 PCB design by NixVegas, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 158.5 × 137.3 mm, with 57 components from 29 distinct parts.

Its main chip is the ESP32-C6-MINI-1, from the ESP32 family. By type, the board carries 14 resistors, 12 LEDs, 9 capacitors, 5 diodes, 4 switches and 3 connectors.

It belongs with the wearables and dev boards & breakouts designs in this gallery.

From the project

Revision 1.0 of the Nix badge

This repo contains KiCad files and Nix expressions for fabricating the Nix Badge using JLCPCB.

- nix build ^ - Gerbers are in result - Fab output (nixos1.zip Gerber archive; bom.csv and positions.csv for placement) are in result-fab - Renders are in result-render - DRC and ERC checks are in result-check`

Use NixOS/branding and produce the output .#nixos-branding.artifacts.internal.nixos-logomark-default-gradient-none.

Main components on the Pcb

ESP32-C6-MINI-1

Pcb bill of materials (BOM)

57 components, 29 distinct parts.

QtyPartRefs
1
~
RICHTEK(立锜)
U1
1
ESP32-C6-MINI-1
U2
1
DMG2301L
Q1
1
Q13FC1350000400
Seiko Epson
X1
1
TYPE-C-SMD_HX-TYPE-C-16PIN
J1
1
Conn_2Rows-15Pins
J2
1
Micro_SD_Card_Det_Hirose_DM3AT
J4
3
Battery_Cell
BT1, BT2, BT3
2
~
H1, H2
1
~
PN1
3
Tactile Button, 160gf
XUNPU
S1, S2, S3
1
SW_SPST
SW1
12
WS2812B
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +4
2
H12VS06B
hongjiacheng
D1, D2
1
White
Hubei KENTO Elec
D3
1
Red
Hubei KENTO Elec
D4
1
B1040W
hongjiacheng
D5
4
100nF
Samsung Electro-Mechanics
C1, C2, C4, C8
2
2.2uF
Samsung Electro-Mechanics
C3, C5
2
12pF
FH(Guangdong Fenghua Advanced Tech)
C6, C7
Show 9 more
QtyPartRefs
1
1uF
Samsung Electro-Mechanics
C9
1
330Ω
UNI-ROYAL(Uniroyal Elec)
R1
5
100kΩ
UNI-ROYAL(Uniroyal Elec)
R2, R7, R8, R9, R12
2
5.1kΩ
UNI-ROYAL(Uniroyal Elec)
R3, R4
1
4.7kΩ
UNI-ROYAL(Uniroyal Elec)
R5
1
2.2kΩ
UNI-ROYAL(Uniroyal Elec)
R6
2
1MΩ
UNI-ROYAL(Uniroyal Elec)
R10, R11
1
10kΩ
UNI-ROYAL(Uniroyal Elec)
R13
1
10kΩ
UNI-ROYAL(Uniroyal Elec)
R14

Pcb design files

The KiCad project lives in the NixVegas/pcb repository on GitHub; these links point at the commit this page was built from.

Pcb: common questions

What microcontroller does the Pcb use?

The Pcb is built around the ESP32-C6-MINI-1, from the ESP32 family.

How big is the Pcb?

The Pcb measures 158.5 × 137.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb?

57 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb design files?

From the NixVegas/pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which NixVegas chose for the repository.

Can I test firmware for the Pcb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards