HardLabs

Ali template

npgo22·APRL-Electrical·kicadlibs/templates/ali_v2/ali-template.kicad_pcb

Ali template PCB layout, top view — open source STM32 board by npgo22

About the Ali template PCB

Ali template is an open source STM32 PCB design by npgo22, published on GitHub. It is a 4-layer board measuring 85 × 76 mm, with 66 components from 28 distinct parts.

Its main chip is the STM32H563RIV6, from the STM32 family. Other key parts include the AP2112K-3.3TRG1, TJA1462ATK/0Z and LAN8742AI-CZ-TR. By type, the board carries 28 capacitors, 18 resistors, 6 connectors, 5 diodes, 4 ICs and 2 crystals.

From the project

PCBs for APRL electrical

Libraries for KiCad. Reference them with ${APRLLIBS}/...`, set to this folder in Preferences -> Configure Paths.

First-party libs drawn by APRL. Every library is named APRL.

The stock KiCad libraries, vendored whole because KiCad devs hate electrical engineers. Refresh with just vendor-kicad-flatpak.

3D models for every library, flat and keyed by filename. Referenced as ${APRLLIBS}/models/`.

Main components on the Ali template

STM32H563RIV6AP2112K-3.3TRG1TJA1462ATK/0ZLAN8742AI-CZ-TR

Ali template bill of materials (BOM)

66 components, 28 distinct parts.

QtyPartRefs
1
STM32H563RIV6
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
U2
1
TJA1462ATK/0Z
TJA1462ATK
U3
1
LAN8742AI-CZ-TR
LAN8742AI
U4
2
X1E0000210139
25 MHz
Y1, Y2
1
Conn_02x01
J1
1
503159-0501
Conn_01x05
J2
1
GT-USB-7051A
USB_C_Receptacle_USB2.0_16P
J3
1
MSTBV 2,5/ 2-GF-5,08
Screw_Terminal_01x02
J6
1
503159-0301
Conn_01x03
J7
1
HY951180A
Vertical Ethernet
J8
2
0805L050WR
500mA
F1, F2
1
SKRPANE010
SW1
5
LED
D1, D2, D3, D4, D5
3
GRM188D72A105KE01
1uF
C1, C18, C23
11
GRM188R72A104KA35
100nF
C2, C3, C4, C5, C6, C7, C19, C20 +3
4
GRM1885C2E150FW07
15pF
C8, C9, C27, C28
2
GRM188R71A225KE15
2.2uF
C10, C11
6
GRM21BZ71A226ME15
22uF
C12, C13, C14, C15, C16, C17
1
GRM1885C1H471JA01
470pF
C24
Show 8 more
QtyPartRefs
1
GRM188R71H224KAC4
220nF
C26
2
RC0603FR-074K7L
4.7k
R1, R2
7
RC0603FR-0710KL
10k
R3, R4, R5, R6, R7, R14, R16
1
AC0603FR-07120RL
120R
R8
1
RC0603FR-071K5L
1.5k
R9
4
RC0603FR-0747RL
47R
R10, R11, R12, R13
1
RT0603BRD0712K1L
12.1k
R15
2
RC0603FR-07330RL
330R
R17, R18

Ali template design files

The KiCad project lives in the npgo22/APRL-Electrical repository on GitHub; these links point at the commit this page was built from.

Ali template: common questions

What microcontroller does the Ali template use?

The Ali template is built around the STM32H563RIV6, from the STM32 family.

How big is the Ali template PCB?

The Ali template measures 85 × 76 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Ali template?

66 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ali template design files?

From the npgo22/APRL-Electrical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ali template design in my own project?

The repository has no license, so all rights stay with npgo22. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ali template without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in APRL-Electrical

Similar boards