HardLabs

Pressuretransducers

npgo22·APRL-Electrical·ali/v2/pressuretransducers/pressuretransducers.kicad_pcb

Pressuretransducers PCB layout, top view — open source STM32 board by npgo22

About the Pressuretransducers PCB

Pressuretransducers is an open source STM32 PCB design by npgo22, published on GitHub. It is a 4-layer board measuring 85 × 76 mm, with 216 components from 39 distinct parts.

Its main chip is the STM32H563RIV6, from the STM32 family. Other key parts include the AP2112K-3.3TRG1, TJA1462ATK/0Z, LAN8742AI-CZ-TR and ADS131M08IRSNR. By type, the board carries 89 capacitors, 68 resistors, 25 connectors, 21 diodes, 6 ICs and 3 crystals.

From the project

PCBs for APRL electrical

Main components on the Pressuretransducers

STM32H563RIV6AP2112K-3.3TRG1TJA1462ATK/0ZLAN8742AI-CZ-TRADS131M08IRSNR

Pressuretransducers bill of materials (BOM)

216 components, 39 distinct parts.

QtyPartRefs
1
STM32H563RIV6
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
U2
1
TJA1462ATK/0Z
TJA1462ATK
U3
1
LAN8742AI-CZ-TR
LAN8742AI
U4
2
ADS131M08IRSNR
ADS131M08IRSN
U5, U6
2
X1E0000210139
25 MHz
Y1, Y3
1
SX3M8.192M20F30TNN
8.192 MHz
Y2
1
Conn_02x01
J1
1
503159-0501
Conn_01x05
J2
1
GT-USB-7051A
USB_C_Receptacle_USB2.0_16P
J3
1
Conn_02x09_Counter_Clockwise
J4
1
503159-1501
Conn_01x15
J5
2
MSTBV 2,5/ 2-GF-5,08
Screw_Terminal_01x02
J6, J7
1
503159-0301
Conn_01x03
J8
1
HY951180A
Vertical Ethernet
J9
16
503159-0201
Conn_01x02
J10, J11, J12, J13, J14, J15, J16, J17 +8
2
0805L050WR
500mA
F1, F2
1
1812L075/33DR
750mA
F3
1
SKRPANE010
SW1
5
LED
D1, D2, D3, D4, D5
Show 19 more
QtyPartRefs
16
SMF7V0A-E3-18
SMF7V0A
D6, D7, D8, D9, D10, D11, D12, D13 +8
7
GRM188D72A105KE01
1uF
C1, C19, C24, C36, C39, C66, C69
18
GRM188R72A104KA35
100nF
C2, C3, C4, C5, C6, C7, C12, C20 +10
4
GRM1885C2E150FW07
15pF
C8, C9, C28, C29
2
GRM188R71A225KE15
2.2uF
C10, C11
6
GRM21BZ71A226ME15
22uF
C13, C14, C15, C16, C17, C18
1
GRM1885C1H471JA01
470pF
C25
3
GRM188R71H224KAC4
220nF
C27, C53, C83
32
GRM1885C1H102FA01
1nF
C30, C31, C34, C35, C41, C42, C45, C46 +24
16
GRM1885C1H103JA01
10nF
C32, C33, C43, C44, C49, C50, C56, C57 +8
2
RC0603FR-074K7L
4.7k
R1, R2
9
RC0603FR-0710KL
10k
R3, R4, R5, R6, R7, R8, R9, R16 +1
1
AC0603FR-07120RL
120R
R10
1
RC0603FR-071K5L
1.5k
R11
4
RC0603FR-0747RL
47R
R12, R13, R14, R15
1
RT0603BRD0712K1L
12.1k
R17
2
RC0603FR-07330RL
330R
R19, R20
32
RT0603BRD071KL
1k
R21, R22, R25, R26, R27, R28, R31, R32 +24
16
ERA-6AEB47R5V
47.5R
R23, R24, R29, R30, R35, R36, R41, R42 +8

Pressuretransducers design files

The KiCad project lives in the npgo22/APRL-Electrical repository on GitHub; these links point at the commit this page was built from.

Pressuretransducers: common questions

What microcontroller does the Pressuretransducers use?

The Pressuretransducers is built around the STM32H563RIV6, from the STM32 family.

How big is the Pressuretransducers PCB?

The Pressuretransducers measures 85 × 76 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Pressuretransducers?

216 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pressuretransducers design files?

From the npgo22/APRL-Electrical repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pressuretransducers design in my own project?

The repository has no license, so all rights stay with npgo22. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pressuretransducers without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in APRL-Electrical

Similar boards