YamhillMAX2680Mixer
About the YamhillMAX2680Mixer PCB
YamhillMAX2680Mixer is an open source PCB design by NT7S, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 18 components from 15 distinct parts.
By type, the board carries 7 capacitors, 6 connectors, 2 inductors, 2 resistors and 1 IC.
It belongs with the rf & radio designs in this gallery.
From the project
Modular learning system for radio electronics
Project Yamhill is the successor to the Willamette Transceiver, also known as the qrp-l Group Project. The purpose of this endeavor is to provide a platform to learn about radio electronics at a system level. Modules that correspond to the blocks of a block diagram will be the basis upon which different types of radio designs will be created. A modular 3D printed backplane will be the chassis, user interface, and power supply for the radio experiments. The desired goal is to have a high-performance CW QRP transceiver at the end of the main project run, however there would be the capacity to…
YamhillMAX2680Mixer bill of materials (BOM)
18 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | SOT-23-6 | U1 |
| 1 | RF | SMA_Jack_Vertical | J1 |
| 1 | LO | SMA_Jack_Vertical | J2 |
| 1 | VCC | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | IF | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ~{SHDN} | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | IF | SMA_Jack_Vertical | J6 |
| 2 | T37-X T37-x | T37-V | L1, L2 |
| 3 | 100N 100n | C_Disc_D7.0mm_W2.5mm_P5.00mm | C1, C4, C6 |
| 1 | ~ | TRIMCAP-MURATA | C2 |
| 1 | ~ | C_Disc_D7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 1u | C_Disc_D7.0mm_W2.5mm_P5.00mm | C5 |
| 1 | 100U 100u | CP_Radial_D8.0mm_P5.00mm | C7 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | ~ | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
YamhillMAX2680Mixer design files
The KiCad project lives in the NT7S/Yamhill repository on GitHub; these links point at the commit this page was built from.
YamhillMAX2680Mixer: common questions
How big is the YamhillMAX2680Mixer PCB?
The YamhillMAX2680Mixer measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the YamhillMAX2680Mixer?
18 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the YamhillMAX2680Mixer design files?
From the NT7S/Yamhill repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the YamhillMAX2680Mixer design in my own project?
The repository has no license, so all rights stay with NT7S. Use it as a reference, and ask the author before reusing the design.
More boards in Yamhill
RP2040/RP2350YamhillFrontPanel
170 × 100 mm207 parts4LNo license9
YamhillPowerDistribution
50 × 50 mm49 parts2LNo license9
YamhillActiveAFFilter
50 × 50 mm27 parts2LNo license9
YamhillDualDoubleTunedCircuit
50 × 50 mm22 parts2LNo license9
YamhillJFETPreamp
50 × 50 mm21 parts2LNo license9
YamhillAFFeedbackAmp
50 × 50 mm20 parts2LNo license9
YamhillDiodeRingMixer
50 × 50 mm10 parts2LNo license9
YamhillProtoBoard1x1
50 × 50 mm8 parts2LNo license9
YamhillProtoBoard1x1DIP
50 × 50 mm8 parts2LNo license9
YamhillBNCAntennaBoard
50 × 50 mm4 parts2LNo license9
YamhillTemplate1x1
50 × 50 mm4 parts2LNo license9
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372