YamhillTemplate1x1
About the YamhillTemplate1x1 PCB
YamhillTemplate1x1 is an open source PCB design by NT7S, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 4 components from 1 distinct parts.
It belongs with the rf & radio designs in this gallery.
From the project
Modular learning system for radio electronics
Project Yamhill is the successor to the Willamette Transceiver, also known as the qrp-l Group Project. The purpose of this endeavor is to provide a platform to learn about radio electronics at a system level. Modules that correspond to the blocks of a block diagram will be the basis upon which different types of radio designs will be created. A modular 3D printed backplane will be the chassis, user interface, and power supply for the radio experiments. The desired goal is to have a high-performance CW QRP transceiver at the end of the main project run, however there would be the capacity to…
YamhillTemplate1x1 bill of materials (BOM)
4 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
YamhillTemplate1x1 design files
The KiCad project lives in the NT7S/Yamhill repository on GitHub; these links point at the commit this page was built from.
YamhillTemplate1x1: common questions
How big is the YamhillTemplate1x1 PCB?
The YamhillTemplate1x1 measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the YamhillTemplate1x1?
4 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the YamhillTemplate1x1 design files?
From the NT7S/Yamhill repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the YamhillTemplate1x1 design in my own project?
The repository has no license, so all rights stay with NT7S. Use it as a reference, and ask the author before reusing the design.
More boards in Yamhill
RP2040/RP2350YamhillFrontPanel
170 × 100 mm207 parts4LNo license9
YamhillPowerDistribution
50 × 50 mm49 parts2LNo license9
YamhillActiveAFFilter
50 × 50 mm27 parts2LNo license9
YamhillDualDoubleTunedCircuit
50 × 50 mm22 parts2LNo license9
YamhillJFETPreamp
50 × 50 mm21 parts2LNo license9
YamhillAFFeedbackAmp
50 × 50 mm20 parts2LNo license9
YamhillMAX2680Mixer
50 × 50 mm18 parts2LNo license9
YamhillDiodeRingMixer
50 × 50 mm10 parts2LNo license9
YamhillProtoBoard1x1
50 × 50 mm8 parts2LNo license9
YamhillProtoBoard1x1DIP
50 × 50 mm8 parts2LNo license9
YamhillBNCAntennaBoard
50 × 50 mm4 parts2LNo license9
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372