CF2X
ObitoLambo·CF2X
About the CF2X PCB
CF2X is an open source STM32 PCB design by ObitoLambo, published on GitHub. It is a 4-layer board measuring 36 × 36 mm, with 106 components from 54 distinct parts.
Its main chip is the STM32F405RGTx, from the STM32 family. Other key parts include the 24LC64F, CF-Expansion-Left, CF-Expansion-Right, BMI088 and BMP388. By type, the board carries 32 capacitors, 27 resistors, 13 ICs, 12 diodes, 9 connectors and 4 transistors.
Main components on the CF2X
CF2X bill of materials (BOM)
106 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F405RGTx | LQFP-64_10x10mm_P0.5mm | U101 |
| 1 | 24LC64F | SOT-23-5 | U102 |
| 1 | CF-Expansion-Left | CF-Expension | U103 |
| 1 | CF-Expansion-Right | CF-Expension | U104 |
| 1 | BMI088 | PQFN50P450X300X100-16N | U201 |
| 1 | BMP388 | PQFN50P200X200X80-10N | U202 |
| 2 | TLV70030_WSON6 | WSON-6_1.5x1.5mm_P0.5mm | U301, U303 |
| 1 | TPS62170DSG | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U302 |
| 1 | RFX2411N | QFN40P300X300X60-21N-D | U304 |
| 1 | SiP32431DR3 | SOT-363_SC-70-6 | U305 |
| 1 | DS28E05 | SOT-23 | U306 |
| 1 | nRF51x22-QFxx | QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm | U308 |
| 4 | WSD2018ADN22 | WSD2018ADN22 | Q101, Q102, Q103, Q104 |
| 1 | 8MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y101 |
| 1 | 16MHz | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y301 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J101 |
| 4 | Conn_01x03 | motor | J102, J103, J105, J106 |
| 1 | Battery + | PAD | J107 |
| 1 | Battery _ | PAD | J108 |
| 2 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J301, J302 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BAL-NRF02D3 | BAL-NRF02D3 | B101 |
| 2 | ADFC15-2450.00-A-T | FIL_ADFC15-2450.00-A-T | FL301, FL302 |
| 1 | SW1 | EVQPUD02K | SW301 |
| 4 | 1N5819 | D_SOD-523 | D101, D102, D103, D104 |
| 2 | LEDB | LED_0402_1005Metric | D105, D303 |
| 1 | RED_L | LED_XL_3210SURC | D106 |
| 1 | RED_R | LED_XL_3210SURC | D107 |
| 1 | GREEN_L | LED_XL_3210SURC | D108 |
| 1 | GREEN_R | LED_XL_3210SURC | D109 |
| 1 | D5819 | D_SOD-123 | D301 |
| 1 | SMF4L17A | D_SOD-123F | D302 |
| 1 | 2.2uH | L_Changjiang_FNR3015S | L301 |
| 1 | 1uH | L_0402_1005Metric | L302 |
| 1 | 2nH | L_0402_1005Metric | L303 |
| 11 | 100nF | C_0402_1005Metric | C101, C102, C103, C104, C107, C201, C202, C312 +3 |
| 1 | 4.7uF | C_0603_1608Metric | C105 |
| 2 | 10nF | C_0402_1005Metric | C106, C305 |
| 4 | 10pF | C_0402_1005Metric | C108, C109, C318, C319 |
| 5 | 4.7uF | C_0402_1005Metric | C110, C111, C308, C309, C311 |
| 1 | 10uF | C_0805_2012Metric | C301 |
| 1 | 22uF | C_0805_2012Metric | C302 |
| 4 | 1uF | C_0402_1005Metric | C303, C304, C306, C307 |
| 1 | 220pF | C_0402_1005Metric | C310 |
| 1 | 47nF | C_0402_1005Metric | C315 |
| 1 | 2.2nF | C_0402_1005Metric | C317 |
| 6 | 100R | R_0402_1005Metric | R101, R102, R108, R109, R117, R118 |
| 7 | 10k | R_0402_1005Metric | R105, R106, R107, R112, R113, R301, R304 |
| 1 | 470R | R_0402_1005Metric | R114 |
| 4 | 2.2k | R_0402_1005Metric | R115, R116, R201, R202 |
| 3 | 47R | R_0402_1005Metric | R119, R120, R309 |
| 2 | 110k | R_0402_1005Metric | R302, R306 |
| 1 | 430k | R_0402_1005Metric | R303 |
| 1 | 82k | R_0402_1005Metric | R305 |
| 2 | 1k | R_0402_1005Metric | R307, R308 |
CF2X design files
The KiCad project lives in the ObitoLambo/CF2X repository on GitHub; these links point at the commit this page was built from.
- LayoutCF2X_V2_OLD.kicad_pcb
- SchematicCF2X_V2_OLD.kicad_sch
CF2X: common questions
What microcontroller does the CF2X use?
The CF2X is built around the STM32F405RGTx, from the STM32 family.
How big is the CF2X PCB?
The CF2X measures 36 × 36 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the CF2X?
106 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the CF2X design files?
From the ObitoLambo/CF2X repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CF2X design in my own project?
The repository has no license, so all rights stay with ObitoLambo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CF2X without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k