98 open source boards using the BMI088

Real designs built with the BMI088, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

98 boardsClear filters|Most starred

How designs wire the BMI088

Read from the KiCad layouts of 74 open source designs, one per repository: what each pin of the BMI088 connects to, and the resistors, capacitors and other passives placed on it.

  • The VDDIO pin has a decoupling capacitor on 67 of 72 designs, most often 100 nF (then 10 µF).
  • The VDD pin has a decoupling capacitor on 65 of 74 designs, most often 100 nF (then 10 µF).
  • The INT4 pin is left unconnected on 61 of 71 designs (a signal on 9).
  • The INT2 pin is left unconnected on 58 of 74 designs (a signal on 15).
INT2pin 1Connected to: Not connected 78% · a signal 20%
NCpin 2Connected to: GND 60% · not connected 36%
VDDpin 3Connected to: 3.3V 78% · a signal 18%
  • Decoupling capacitor on 88% · 100 nF (163), 10 µF (6), 1 µF (6)
GNDApin 4Connected to: GND 93%
GNDIOpin 6Connected to: GND 96%
PSpin 7Connected to: GND 63% · 3.3V 26%
VDDIOpin 11Connected to: 3.3V 79% · a signal 18%
  • Decoupling capacitor on 93% · 100 nF (149), 10 µF (7), 1 µF (6)
INT4pin 13Connected to: Not connected 86%

8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LittleBrain-STM32F4-Sensorboard by pms67, NxtPX4V2 by ArduPilot, Open MOtor DRiver Initiative (OMODRI) - Extension Board by open-dynamic-robot-initiative and Elec RPI Robot HAT by pollen-robotics.

The BMI088 in open source designs

The gallery holds 98 open source boards using the BMI088 from 75 GitHub repositories; a typical one measures about 55 × 57.2 mm and carries around 104 components.

80% use four copper layers or more, and 43% carry an open source license.

The most starred is LittleBrain-STM32F4-Sensorboard by pms67.

Microcontrollers on boards using the BMI088

BMI088: common questions

Where can I find a BMI088 reference design?

Each of the 98 boards on this page is a real design using the BMI088. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the BMI088 VDDIO pin?

The VDDIO pin has a decoupling capacitor on 67 of 72 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 74 open source designs using the BMI088.

What decoupling capacitors do designs use on the BMI088 VDD pin?

The VDD pin has a decoupling capacitor on 65 of 74 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 74 open source designs using the BMI088.

How is the BMI088 INT4 pin connected?

The INT4 pin is left unconnected on 61 of 71 designs (a signal on 9). Counted from the KiCad layouts of 74 open source designs using the BMI088.

What parts are used alongside the BMI088?

The USBLC6-2SC6, BMP388, AMS1117-3.3, BMP280 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the BMI088 use?

Most are built on STM32 (47), ESP32 (17), Microchip SAM (5) and NXP (3).

How big is a typical board using the BMI088?

The median is 55 × 57.2 mm, and 20% are two-layer designs.

What is the most popular open source board using the BMI088?

By GitHub stars, LittleBrain-STM32F4-Sensorboard by pms67, with 337 stars.

Can I simulate one of these boards using the BMI088 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part