15 open source boards using the SIP32431DR3
Real designs built with the SIP32431DR3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MicroSD-Switcher-Reader
will127534
42.3 × 60.2 mm72 parts4LMIT25Nordic nRF
Shio Rev A
uw-x
50.2 × 24.2 mm67 parts2LCERN-OHL-W-2.017STM32
Raccoon
barbinbrad
100.9 × 71.5 mm56 parts4LMIT16STM32
Raccoon
sunnyhaibin
100.9 × 71.5 mm56 parts4LMIT9ESP32
Niphar
mornepousse
340.8 × 104.7 mm275 parts4LMIT4ESP32
Obd32
mkrasselt1
53.9 × 53.1 mm76 parts2LNo license4STM32
Eqs energy harvesting frontend
lkoehli
87.4 × 35.6 mm108 parts4LNo license1Peripheral load switch
matthias-bs
25.4 × 14 mm6 parts2LSHL-2.11STM32
CF2X
ObitoLambo
36 × 36 mm106 parts4LNo license0ESP32
Telemetry in midair
tmpk13
25 × 54 mm59 parts4LMIT0STM32
PGE
sKulll-J
85.5 × 66.8 mm51 parts2LNo license0- schematic only · 17 parts
Design-Project
wizzy713
17 partsNo license0 STM32
BlackPanda
lukasloetkolben
47.5 × 41.7 mm86 parts4LMIT92ESP32
Rot
mornepousse
169.3 × 198.4 mm275 parts4LMIT4Raspberry Pi
CM4IOv5
mindhashnl
160 × 90 mm137 parts4LNo license0
How designs wire the SIP32431DR3
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the SIP32431DR3 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin has a capacitor to GND on 8 of 13 designs, most often 10 µF (then 1 µF).
- The OUT pin has a capacitor to GND on 7 of 13 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: A connector 23% · VBUS 31% |
|
| GNDpin 2, 5 | Connected to: GND 85% | — |
| ONpin 3 | Connected to: The microcontroller 62% |
|
| INpin 4 | Connected to: A connector 31% · 5V 46% |
|
| NCpin 6 | Connected to: Not connected 92% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BlackPanda by lukasloetkolben, MicroSD-Switcher-Reader by will127534, Shio Rev A by uw-x and Raccoon by barbinbrad.
The SIP32431DR3 in open source designs
The gallery holds 15 open source boards using the SIP32431DR3 from 14 GitHub repositories; a typical one measures about 69.7 × 57.1 mm and carries around 72 components.
71% use four copper layers or more, and 53% carry an open source license.
The most starred is BlackPanda by lukasloetkolben.
Parts used alongside the SIP32431DR3
Microcontrollers on boards using the SIP32431DR3
What boards using the SIP32431DR3 are built for
SIP32431DR3: common questions
Where can I find a SIP32431DR3 reference design?
Each of the 15 boards on this page is a real design using the SIP32431DR3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SIP32431DR3 IN pin connected?
The IN pin has a capacitor to GND on 8 of 13 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the SIP32431DR3.
How is the SIP32431DR3 OUT pin connected?
The OUT pin has a capacitor to GND on 7 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the SIP32431DR3.
What parts are used alongside the SIP32431DR3?
The AMS1117-3.3, AMS1117-5.0, BMP388, NEO-M8P and STM32F413RGT6 appear in the most repositories here.
Which microcontrollers do boards using the SIP32431DR3 use?
Most are built on STM32 (6), ESP32 (4), Nordic nRF (1) and Raspberry Pi (1).
How big is a typical board using the SIP32431DR3?
The median is 69.7 × 57.1 mm, and 29% are two-layer designs.
What is the most popular open source board using the SIP32431DR3?
By GitHub stars, BlackPanda by lukasloetkolben, with 92 stars.
Can I simulate one of these boards using the SIP32431DR3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.