Zalt Video and Sound
obiwanjacobi·Zalt·VDP Board v1.0 - locked/Kicad/VDP-Composite.kicad_pcb
About the Zalt Video and Sound PCB
Zalt Video and Sound is an open source PCB design by obiwanjacobi, published on GitHub under the Custom license license. It is a 2-layer board measuring 99.7 × 99.7 mm, with 107 components from 38 distinct parts.
Other key parts include the G22V10, 74HCT574, V9958, 74HCT04 and CXA1645. By type, the board carries 45 resistors, 40 capacitors, 12 ICs, 3 crystals, 3 connectors and 1 jumper.
It belongs with the retro computing designs in this gallery.
From the project
Zalt is a home brew Z80 computer with a modern(isch) chipset.
This Board contains the V9958 (video) and a YM2149 (sound) vintage chips. It contains the full set of DRAMs for the V9958, that is a VRAM of 128kB and an extra 64kB extension.
The video signals are available on an IDC connector with grounds separating each signal. RGB and Composite video as well as Chroma and Luma (s-video) signals are present. Note that this is not VGA! Also the stereo Audio is available on this connector.
Main components on the Zalt Video and Sound
Zalt Video and Sound bill of materials (BOM)
107 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | G22V10 | DIP-24_W7.62mm_LongPads | U101 |
| 1 | 74HCT574 | SOIC-20W_7.5x12.8mm_P1.27mm | U102 |
| 1 | V9958 | DIP-64_1.78mm_W19.05mm | U201 |
| 1 | 74HCT04 | SOIC-14_3.9x8.7mm_P1.27mm | U202 |
| 1 | CXA1645 | DIP-24_W10.16mm_LongPads | U203 |
| 6 | D41464 | DIP-18_W7.62mm_LongPads | U301, U302, U303, U304, U305, U306 |
| 1 | YM2149 | DIP-40_W15.24mm_LongPads | U401 |
| 1 | 21.47727MHz | Crystal_HC49-4H_Vertical | Y201 |
| 1 | 4.433618MHz | Crystal_HC49-4H_Vertical | Y202 |
| 1 | 2-4MHz | Crystal_HC49-4H_Vertical | Y401 |
| 1 | Power +5V | TerminalBlock_bornier-2_P5.08mm | J101 |
| 1 | AVConn | IDC-Header_2x10_P2.54mm_Horizontal | J207 |
| 1 | Ports | PinHeader_2x10_P2.54mm_Vertical | J401 |
| 1 | P*** | 1pin | 1PIN |
| 1 | BUSHDR-A | PinHeader_2x20_P2.54mm_Vertical | HDR101 |
| 1 | BUSHDR-B | PinHeader_2x20_P2.54mm_Vertical | HDR102 |
| 1 | EnableIM | PinHeader_1x03_P2.54mm_Vertical | JP102 |
| 22 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C101, C102, C205, C206, C208, C210, C211, C212 +14 |
| 3 | 30pF | C_Disc_D6.0mm_W4.4mm_P5.00mm | C201, C204, C405 |
| 3 | 22pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C202, C203, C404 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | *27/18pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C207 |
| 1 | 10uF | CP_Elec_4x3 | C209 |
| 1 | 4.7pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C215 |
| 1 | 47pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C216 |
| 8 | 220uF | CP_Elec_6.3x7.7 | C217, C218, C219, C220, C221, C222, C402, C403 |
| 1 | 470k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201 |
| 15 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R202, R203, R204, R205, R206, R207, R208, R209 +7 |
| 7 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R214, R220, R232, R236, R406, R407, R408 |
| 2 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R215, R409 |
| 4 | 470 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R217, R222, R223, R225 |
| 1 | *20/16k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R219 |
| 1 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R221 |
| 1 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R224 |
| 6 | 75 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R226, R227, R228, R229, R230, R231 |
| 1 | 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R234 |
| 1 | 180 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R235 |
| 3 | 3k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R401, R402, R403 |
| 2 | 1k6 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R404, R405 |
Zalt Video and Sound design files
The KiCad project lives in the obiwanjacobi/Zalt repository on GitHub; these links point at the commit this page was built from.
Zalt Video and Sound: common questions
How big is the Zalt Video and Sound PCB?
The Zalt Video and Sound measures 99.7 × 99.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Zalt Video and Sound?
107 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Zalt Video and Sound design files?
From the obiwanjacobi/Zalt repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Zalt Video and Sound design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in Zalt
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k