18 open source boards using the YM2149

Real designs built with the YM2149, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the YM2149

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the YM2149 connects to, and the resistors, capacitors and other passives placed on it.

  • The NC_2 pin is left unconnected on 17 of 17 designs.
  • The NC_5 pin is left unconnected on 17 of 17 designs.
  • The TEST1 pin is left unconnected on 16 of 17 designs.
  • The BC2 pin is tied to 5V on 15 of 17 designs (a signal on 2).
VSS_1pin 1Connected to: GND 100%
NC_2pin 2Connected to: Not connected 100%
A_3pin 3Connected to: Signal 100%
  • Resistor to GND on 71% · 470 Ω (7), 3 kΩ (3), 1 kΩ (2)
  • Series resistor on 53% · 1 kΩ (4), 10 kΩ (2), 1.6 kΩ (1)
  • Series capacitor on 35% · 10 µF (6)
B_4pin 4Connected to: Signal 100%
  • Resistor to GND on 71% · 470 Ω (7), 3 kΩ (3), 1 kΩ (2)
  • Series resistor on 59% · 1 kΩ (4), 4.7 kΩ (2), 3.3 kΩ (2)
  • Series capacitor on 35% · 10 µF (6)
NC_5pin 5Connected to: Not connected 100%
IOA7pin 14Connected to: LM311 35%, a connector 29% · not connected 24%
  • Pull-up to VCC on 41% · 1 kΩ (6), 10 kΩ (1)
  • Series resistor on 41% · 220 kΩ (6), 680 Ω (1)
A9_24pin 24Connected to: GND 82%
A8pin 25Connected to: 5V 76% · a signal 18%
BC2pin 28Connected to: 5V 88%
C_38pin 38Connected to: Signal 100%
  • Resistor to GND on 71% · 470 Ω (7), 3 kΩ (3), 1 kΩ (2)
  • Series resistor on 53% · 1 kΩ (6), 1.6 kΩ (2), 4.7 kΩ (2)
  • Series capacitor on 35% · 10 µF (6)
TEST1pin 39Connected to: Not connected 94%
VCCpin 40Connected to: 5V 100%
  • Decoupling capacitor on 59% · 100 nF (10)

28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Rc2014-ym2149 by electrified, Omega-Mainboard by merlinkv and Zx sizif-128 by UzixLS.

The YM2149 in open source designs

The gallery holds 18 open source boards using the YM2149 from 18 GitHub repositories; a typical one measures about 158.8 × 100.5 mm and carries around 116 components.

94% are two-layer designs, the rest use four layers or more, and 78% carry an open source license.

The most starred is Omega-Mainboard by skiselev.

Microcontrollers on boards using the YM2149

YM2149: common questions

Where can I find a YM2149 reference design?

Each of the 18 boards on this page is a real design using the YM2149. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the YM2149 NC_2 pin connected?

The NC_2 pin is left unconnected on 17 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the YM2149.

How is the YM2149 NC_5 pin connected?

The NC_5 pin is left unconnected on 17 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the YM2149.

How is the YM2149 TEST1 pin connected?

The TEST1 pin is left unconnected on 16 of 17 designs. Counted from the KiCad layouts of 17 open source designs using the YM2149.

What parts are used alongside the YM2149?

The 74HCT04, 74HCT74, 74LS07, 74HCT00 and 74HCT153 appear in the most repositories here.

Which microcontrollers do boards using the YM2149 use?

Most are built on ESP32 (1) and ESP8266 (1).

How big is a typical board using the YM2149?

The median is 158.8 × 100.5 mm, and 94% are two-layer designs.

What is the most popular open source board using the YM2149?

By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.

Can I simulate one of these boards using the YM2149 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part