47 open source boards using the 74HCT574
Real designs built with the 74HCT574, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TMS9918A
jblang
99.1 × 49.9 mm36 parts2LNo license145TEC-1G
MarkJelic
63.5 × 85.6 mm31 parts2LGPL-3.045Sg1000
barbeque
162.2 × 134.6 mm71 parts2LCC-BY-NC-4.033AVR/Arduino
Hardmpu wt
PickledDog
106.1 × 95.4 mm46 parts2LApache-2.030Leako
barbeque
149.1 × 98.8 mm128 parts2LNo license20HW VGA
daveho
150 × 90 mm75 parts2LNo license192FISC
DoctorWkt
214.6 × 123.2 mm73 parts2LGPL-3.010AVR/Arduino
Z80Atmega128
46nori
170 × 130 mm105 parts4LGPL-3.09SPU2
rraider
400 × 300 mm736 parts2LMIT7FISC
DoctorWkt
231.3 × 96.5 mm59 parts2LGPL-3.07Blinker-Fuild
CRG-Glen
35.3 × 83.5 mm147 parts4LCERN-OHL-P-2.05TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Cpu board 03
sim82
99.1 × 94.2 mm63 parts2LMIT1Dac circ
b3dag
193 × 160 mm149 parts2LNo license0Motherboard
MicroLind-Developers
170.2 × 170.2 mm120 parts4LCERN-OHL-P-2.00TMS9918
michalin
100 × 100 mm20 parts2LGPL-3.0418-bit computer Input Module
xrayer2000
106 parts2LCC-BY-NC-4.030TMS9918A YM2149
daveho
150 × 90 mm44 parts2LNo license19Zalt Video and Sound
obiwanjacobi
99.7 × 99.7 mm107 parts2LCustom license16Registers-StackPointer
DutchMaker
121.9 × 121.9 mm19 parts2LNo license14GFX
rraider
142 × 122 mm302 parts4LMIT7TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Cpu board 03 4l
sim82
99.1 × 94.2 mm62 parts4LMIT12116 NEW UNIT PULSE IN 64
hamayanShowa-ele
166 × 180 mm176 parts2LNo license0NXP
MCL68
MicroCoreLabs
31.6 × 84.1 mm13 parts4LNo license532InterruptAndKeyboard
daveho
150 × 90 mm37 partsNo license19GPIOExpansion
ja1umi
155 × 114 mm33 parts2LMIT10Vga mem output 01 4l
sim82
80.9 × 100.6 mm61 parts4LMIT1Display
JAndersM
112.4 × 78.7 mm26 parts2LGPL-3.00ALU
89Mods
209.6 × 108 mm82 parts4LMIT2Cpu board 02
sim82
119.4 × 91.4 mm58 parts2LMIT1Z80ram
jblang
99.8 × 49.9 mm19 parts2LMIT73Am9511AAddon
ja1umi
72 × 47 mm19 parts2LMIT10GPRModule
crempp
100 × 80 mm51 parts2LNo license4MyCPU VGA
Synthron
83.3 × 68.2 mm19 parts4LNo license2Pcb01 4l
sim82
119.4 × 91.4 mm58 parts4LMIT1
How designs wire the 74HCT574
Read from the KiCad layouts of 29 open source designs, one per repository: what each pin of the 74HCT574 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 14 of 29 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 90% | — |
| VCCpin 20 | Connected to: 5V 90% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MCL68 by MicroCoreLabs, TMS9918A by jblang, Z80ram by jblang and 6502 Video Card by acwright.
The 74HCT574 in open source designs
The gallery holds 47 open source boards using the 74HCT574 from 30 GitHub repositories; a typical one measures about 115.9 × 94.8 mm and carries around 53 components.
72% are two-layer designs, the rest use four layers or more, and 55% carry an open source license.
The most starred is MCL68 by MicroCoreLabs.
Parts used alongside the 74HCT574
Microcontrollers on boards using the 74HCT574
What boards using the 74HCT574 are built for
74HCT574: common questions
Where can I find a 74HCT574 reference design?
Each of the 47 boards on this page is a real design using the 74HCT574. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT574 VCC pin?
The VCC pin has a decoupling capacitor on 14 of 29 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 29 open source designs using the 74HCT574.
What parts are used alongside the 74HCT574?
The 74HCT04, 74HCT32, 74HCT138, 74HCT00 and 74HCT245 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT574 use?
Most are built on AVR/Arduino (2), ESP32 (1) and NXP (1).
How big is a typical board using the 74HCT574?
The median is 115.9 × 94.8 mm, and 72% are two-layer designs.
What is the most popular open source board using the 74HCT574?
By GitHub stars, MCL68 by MicroCoreLabs, with 532 stars.
Can I simulate one of these boards using the 74HCT574 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.