Sarcle
odehsamuel·Sarcle·hardware/kicad/proof_of_weeding_edge_node.kicad_sch
About the Sarcle PCB
Sarcle is an open source ESP32 PCB design by odehsamuel, published on GitHub under the MIT license. It is a board, with 4 components from 4 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the CN3791 and Quectel_BG95-M3. By type, the board carries 3 ICs and 1 connector.
From the project
Sarcle: An evidence-gated work-payment protocol on Stellar/Soroban
Proof-of-Weeding measures relative change in total green vegetation cover inside a fixed region of interest (ROI) over time.
This repository is built under strict clean-room rules: - No third-party datasets (no Kaggle, ImageNet, PlantDoc, or proprietary farm imagery). - No machine learning models or pretrained weights (all analyzers are classical computer vision with explicit mathematical parameters). - No real field imagery: Every test scene is generated procedurally in this repository using NumPy and PIL mathematical noise. - Zero invented metrics or benchmarks: Reported numbers are…
Main components on the Sarcle
Sarcle bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | CN3791 | SSOP-10_3.9x4.9mm_P1.00mm | U2 |
| 1 | Quectel_BG95-M3 | Quectel_BG95 | U3 |
| 1 | FPC-24P-0.5mm | J1 |
Sarcle design files
The KiCad project lives in the odehsamuel/Sarcle repository on GitHub; these links point at the commit this page was built from.
Sarcle: common questions
What microcontroller does the Sarcle use?
The Sarcle is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How many components are on the Sarcle?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sarcle design files?
From the odehsamuel/Sarcle repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Sarcle design in my own project?
Yes, under the terms of its MIT license, which odehsamuel chose for the repository.
Can I test firmware for the Sarcle without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k