BabyOdes
About the BabyOdes PCB
BabyOdes is an open source PCB design by oficinadesonido, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 60.1 × 109.8 mm, with 91 components from 30 distinct parts.
Other key parts include the HEF4093B, TL074, 4017 and L7805. By type, the board carries 21 resistors, 19 diodes, 10 capacitors, 9 switches, 8 LEDs and 4 ICs.
From the project
Mi Primer Modular
Design & code: Daniel Llermaly Graphic design: Joaquín Contreras Typeface: contrafonts.cl
www.oficinadesonido.org https://www.kickstarter.com/projects/oficinadesonido/my-first-modular
Main components on the BabyOdes
BabyOdes bill of materials (BOM)
91 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HEF4093B | tl074 | U1 |
| 1 | TL074 | tl074 | U2 |
| 1 | 4017 | SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | L7805 | TO-252-2 | U5 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 4 | AUDIOJACK2_SWITCHT AudioJack2_SwitchT | jack3.5verticalTSTN | ClckIn1, clckOut1, cvOut1, gateout1 |
| 2 | SW_SPDT | colader | ClckSel1, largoSeq1 |
| 1 | D_Schottky | D_SOD-123 | Dg1 |
| 1 | 1N4148 | D_SOD-123 | Dp1 |
| 8 | R_Potentiometer | PotGndPin1 | RV1, RV2, RV3, RV4, RV5, RV6, RV7, Rp1 |
| 1 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Rlp1 |
| 1 | SW_Push | SW_Push_5.8 | SW1 |
| 8 | SW_SPST | SW_Push_5.8 | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 2 | 100K 100k | PotGndPin1 | atten1, clkPot1 |
| 8 | LED | LED3mm | lp1, lp2, lp3, lp4, lp5, lp6, lp7, lp8 |
| 2 | D | D_SOD-123 | D1, D2 |
| 9 | D_Schottky | D_SOD-123 | D3, D4, D6, D9, D10, D15, D16, D21 +1 |
| 1 | LedClk | LED3mm | D5 |
| 7 | 1N4148 | D_SOD-123 | D8, D13, D14, D19, D20, D25, D26 |
| 1 | 10UF 10uF | CP_Radial_D4.0mm_P1.50mm | C1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470P 470p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 5 | 100NF 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C8, C9 |
| 2 | 1UF 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 7 | 100K 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R6, R7, R8, R9, R23 |
| 1 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10, R11 |
| 8 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R14, R15, R16, R17, R18, R19 |
| 2 | 10R 10r | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21 |
| 1 | 470K 470k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
BabyOdes design files
The KiCad project lives in the oficinadesonido/miPrimerModular repository on GitHub; these links point at the commit this page was built from.
BabyOdes: common questions
How big is the BabyOdes PCB?
The BabyOdes measures 60.1 × 109.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BabyOdes?
91 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BabyOdes design files?
From the oficinadesonido/miPrimerModular repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BabyOdes design in my own project?
Yes, under the terms of its GPL-3.0 license, which oficinadesonido chose for the repository.
More boards in miPrimerModular
Odes20Vcf
38.8 × 109.5 mm64 parts2LGPL-3.03
DelayOdesSmd
24.1 × 107.2 mm52 parts2LGPL-3.03
AVR/ArduinoChordOdes
30.8 × 111.2 mm52 parts2LGPL-3.03
ADAR
20.3 × 110.2 mm37 parts2LGPL-3.03
OdesLfoSmd
20.5 × 108.7 mm35 parts2LGPL-3.03
VcaOdes
20.2 × 103.5 mm32 parts2LGPL-3.03
Mult
10.1 × 112.4 mm11 parts2LGPL-3.03