Spelaro
ohkajan·Spelaro·spelaroo/spelaroo.kicad_pcb
About the Spelaro PCB
Spelaro is an open source ESP32 PCB design by ohkajan, published on GitHub. It is a 2-layer board measuring 93.8 × 87.3 mm, with 21 components from 16 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the 3.3V and OTJ-5. By type, the board carries 9 capacitors, 4 switches, 3 ICs, 3 connectors and 2 resistors.
It belongs with the audio designs in this gallery.
From the project
A standalone audio player and optical transmitter powered by the ESP32-S3. Play FLAC and MP3 files from a micro SD card, navigate your library using the 2.8-inch screen and 5-way switch, and output clean digital audio via TOSLINK.
Spelarö is a custom hardware project that lets you play flac and mp3 files directly from a micro SD card. It sends the data optically via a toslink transmitter with a toslink cable. There was no product like this, so i decided to make my own for me and my dad.
Storage: Music files are stored on a standard micro SD card. The ESP32-S3 reads the files directly from the card. It then sends it via toslink. Interface: You use a 2.8-inch TFT display to see your library and a 5-way joystick switch to navigate through your libary of songs. Audio Output:** The ESP32-S3 processes the audio data and…
Main components on the Spelaro
Spelaro bill of materials (BOM)
21 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U1 |
| 1 | 3.3V LP2985-3.3 | SOT-23-5 | U2 |
| 1 | OTJ-5 | toslink | U3 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | Conn_01x14_Pin | PinHeader_1x14_P2.54mm_Vertical | J2 |
| 1 | Micro_SD_Card | TF-SMD_TF-012 | J3 |
| 2 | SW_Push | KSR221GLFS_CNK | SW1, SW2 |
| 1 | K1-1506DN-01 韩国韩荣 | SW-TH_K1-1506DN-01 | SW3 |
| 1 | SW_Push | SW_PUSH-12mm | SW4 |
| 1 | 100NF 10nF | C_1206_3216Metric | C1 |
| 1 | 10UF 100nF | C_1206_3216Metric | C2 |
| 3 | 100NF 100nF | C_1206_3216Metric | C3, C5, C9 |
| 2 | 10UF 10uF | C_1206_3216Metric | C4, C6 |
| 1 | 100NF 10µF | C_1206_3216Metric | C7 |
| 1 | 10UF 10µF | C_1206_3216Metric | C8 |
| 2 | 10K 10k | R_1206_3216Metric | R1, R2 |
Spelaro design files
The KiCad project lives in the ohkajan/Spelaro repository on GitHub; these links point at the commit this page was built from.
- Layoutspelaroo/spelaroo.kicad_pcb
- Schematicspelaroo/spelaroo.kicad_sch
- BOMbom.csv
Spelaro: common questions
What microcontroller does the Spelaro use?
The Spelaro is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Spelaro PCB?
The Spelaro measures 93.8 × 87.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spelaro?
21 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spelaro design files?
From the ohkajan/Spelaro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Spelaro design in my own project?
The repository has no license, so all rights stay with ohkajan. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Spelaro without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k