Back charger
Ohrimn·USB-C-12V-car-charger·v1/back_charger/back_charger/back_charger.kicad_pcb
About the Back charger PCB
Back charger is an open source PCB design by Ohrimn, published on GitHub. It is a 4-layer board measuring 65 × 60 mm, with 35 components from 29 distinct parts.
Other key parts include the MPQ4242GVE-0000-AEC1-P. By type, the board carries 16 capacitors, 9 resistors, 3 connectors, 2 diodes, 1 IC and 1 transistor.
It belongs with the power & battery designs in this gallery.
Main components on the Back charger
Back charger bill of materials (BOM)
35 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPQ4242GVE-0000-AEC1-P | MPQ4242GVE0000AEC1P | IC1 |
| 1 | AOD2810 | TO-252-2 | Q1 |
| 1 | XT30PW-M XT30 | XT30PWM | J1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 22-27-2061 USB-C_1 | HDRV6W64P0X254_1X6_1524X580X1170P | J3 |
| 1 | 15A | PTF78 | F1 |
| 1 | 2,529k @ 120°C | R_0603_1608Metric | TH1 |
| 1 | SMAJ16A | D_SMA | D1 |
| 1 | SZESD1L001W1T2G | SOT65P210X110-6N | D2 |
| 1 | 15uH | XAL1513153MED | L1 |
| 1 | 100uF | C_1210_3225Metric | C1 |
| 1 | 2,2uF | C_0603_1608Metric | C2 |
| 2 | 4,7uF | C_0603_1608Metric | C3, C5 |
| 1 | 470pF | C_0603_1608Metric | C4 |
| 1 | 100nF | C_0603_1608Metric | C6 |
| 2 | 0,22uF | C_0603_1608Metric | C7, C8 |
| 2 | 1nF | C_0603_1608Metric | C10, C12 |
| 1 | 0,1uF | C_0603_1608Metric | C11 |
| 2 | 10uF | C_0603_1608Metric | C13, C14 |
| 2 | 47uF | C_1206_3216Metric | C16, C17 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 470uF | C_Elec_10x10.2 | C19 |
| 2 | 10k | R_0603_1608Metric | R1, R2 |
| 1 | 100k | R_0603_1608Metric | R3 |
| 1 | 35.7k | R_0603_1608Metric | R4 |
| 1 | 10m | R_2010_5025Metric | R5 |
| 1 | 0 | R_0603_1608Metric | R6 |
| 1 | 10 | R_0603_1608Metric | R7 |
| 1 | 22k | R_0603_1608Metric | R9 |
| 1 | 1,2k | R_0603_1608Metric | R10 |
Back charger design files
The KiCad project lives in the Ohrimn/USB-C-12V-car-charger repository on GitHub; these links point at the commit this page was built from.
Back charger: common questions
How big is the Back charger PCB?
The Back charger measures 65 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Back charger?
35 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Back charger design files?
From the Ohrimn/USB-C-12V-car-charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Back charger design in my own project?
The repository has no license, so all rights stay with Ohrimn. Use it as a reference, and ask the author before reusing the design.
More boards in USB-C-12V-car-charger
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k