Front charger v2
Ohrimn·USB-C-12V-car-charger·v2/front_charger_v2/front_charger_v2.kicad_pcb
About the Front charger v2 PCB
Front charger v2 is an open source PCB design by Ohrimn, published on GitHub. It is a 4-layer board measuring 28 × 55 mm, with 29 components from 24 distinct parts.
Other key parts include the MPQ4242GVE-0000-AEC1-P. By type, the board carries 14 capacitors, 7 resistors, 3 connectors, 2 diodes, 1 IC and 1 fuse.
It belongs with the power & battery designs in this gallery.
Main components on the Front charger v2
Front charger v2 bill of materials (BOM)
29 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPQ4242GVE-0000-AEC1-P | MPQ4242GVE0000AEC1P | IC1 |
| 1 | XT30PW-M XT30 | XT30PWM | J1 |
| 1 | 22-27-2061 USB-C_1 | HDRV6W64P0X254_1X6_1524X580X1170P | J3 |
| 1 | Conn_01x03_Pin | SHDR3W64P0X254_1X3_762X580X1118P | J4 |
| 1 | 5A | 01550900DR | F1 |
| 1 | SMAJ16A | D_SMA | D1 |
| 1 | SZESD1L001W1T2G | SOT65P210X110-6N | D2 |
| 1 | 4,7u | L_APV_APH1265 | L1 |
| 1 | 100uF | C_1210_3225Metric | C1 |
| 1 | 2,2uF | C_0603_1608Metric | C2 |
| 2 | 4,7uF | C_0603_1608Metric | C3, C5 |
| 1 | 470pF | C_0603_1608Metric | C4 |
| 1 | 100nF | C_0603_1608Metric | C6 |
| 2 | 0,22uF | C_0603_1608Metric | C7, C8 |
| 1 | 0,1uF | C_0603_1608Metric | C11 |
| 2 | 10uF | C_1206_3216Metric | C13, C14 |
| 2 | 47uF | C_1206_3216Metric | C16, C17 |
| 1 | 470uF | C_Elec_10x10.2 | C19 |
| 2 | 4k7 | R_0603_1608Metric | R1, R2 |
| 1 | 100k | R_0603_1608Metric | R3 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 35.7k | R_0603_1608Metric | R4 |
| 1 | 10m | R_2010_5025Metric | R5 |
| 1 | 0 | R_0603_1608Metric | R6 |
| 1 | 10 | R_0603_1608Metric | R7 |
Front charger v2 design files
The KiCad project lives in the Ohrimn/USB-C-12V-car-charger repository on GitHub; these links point at the commit this page was built from.
Front charger v2: common questions
How big is the Front charger v2 PCB?
The Front charger v2 measures 28 × 55 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Front charger v2?
29 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Front charger v2 design files?
From the Ohrimn/USB-C-12V-car-charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Front charger v2 design in my own project?
The repository has no license, so all rights stay with Ohrimn. Use it as a reference, and ask the author before reusing the design.
More boards in USB-C-12V-car-charger
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k