2026-WRO-Future-Engineer
OilRabbit·2026-WRO-Future-Engineer·schemes/Kicad/gen1.kicad_sch

About the 2026-WRO-Future-Engineer PCB
2026-WRO-Future-Engineer is an open source ESP32 PCB design by OilRabbit, published on GitHub. It is a board, with 9 components from 9 distinct parts.
Its main chip is the ESP32-S3-DEVKITC, from the ESP32 family. Other key parts include the Pi Cam 2, BM50 Motor Driver Encoder, YB-MPP01-V1.0 and ST7789 HAT. By type, the board carries 5 ICs, 2 modules and 1 battery holder.
It belongs with the robotics & motion designs in this gallery.
From the project
Our team consists of seven alumni from Po Leung Kuk Tang Yuk Tien College, each of whom previously served as chairperson of the school’s Robotics Team or has a strong interest in robotics. Over years of competitions and training, we have built strong friendships and developed a s
Our team consists of seven alumni from Po Leung Kuk Tang Yuk Tien College, each of whom previously served as chairperson of the school’s Robotics Team or has a strong interest in robotics. Over years of competitions and training, we have built strong friendships and developed a shared commitment to robotics. Last year, our team participated in the WRO Singapore final and placed 28th. Although we want to achieve higher this year, two of our teammates cannot participate due to academic reasons. Thus, we have two new teammates this year, Harrison and Donald become part of our supporters this…
Main components on the 2026-WRO-Future-Engineer
2026-WRO-Future-Engineer bill of materials (BOM)
9 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DEVKITC ESP32-S3-DevKitC | ESP32-S3-DevKitC | U1 |
| 1 | Pi Cam 2 | WQFN-42-1EP_3.5x9mm_P0.5mm_EP2.05x7.55mm | U2 |
| 1 | BM50 Motor Driver Encoder | U6 | |
| 1 | YB-MPP01-V1.0 | TO-252-2 | U8 |
| 1 | ST7789 HAT | U9 | |
| 1 | BM50 | M1 | |
| 1 | Motor_Servo | M2 | |
| 1 | 18650 x 3 | BT1 | |
| 1 | Raspberry Pi 5 | Raspberry-Pi-5-Compute-Module | Module1 |
2026-WRO-Future-Engineer design files
The KiCad project lives in the OilRabbit/2026-WRO-Future-Engineer repository on GitHub; these links point at the commit this page was built from.
2026-WRO-Future-Engineer: common questions
What microcontroller does the 2026-WRO-Future-Engineer use?
The 2026-WRO-Future-Engineer is built around the ESP32-S3-DEVKITC, from the ESP32 family.
How many components are on the 2026-WRO-Future-Engineer?
9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2026-WRO-Future-Engineer design files?
From the OilRabbit/2026-WRO-Future-Engineer repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the 2026-WRO-Future-Engineer design in my own project?
The repository has no license, so all rights stay with OilRabbit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2026-WRO-Future-Engineer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k