Dc dc buck converter
ojomodel·dc-dc-buck-converter·pcb/buck-converter.kicad_pcb
About the Dc dc buck converter PCB
Dc dc buck converter is an open source PCB design by ojomodel, published on GitHub under the MIT license. It is a 2-layer board measuring 54 × 34 mm, with 16 components from 13 distinct parts.
Other key parts include the TPS54302. By type, the board carries 7 capacitors, 5 resistors, 2 connectors, 1 IC and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
10 W buck-converter design study: native KiCad PCB, educational ngspice simulations and engineering verification.
9–18 V input · 5 V / 2 A target · 10 W design study
Project Status: Designed and Simulated — Not Hardware Tested
A 10 W power-electronics portfolio project: a manufacturer-based TPS54302 circuit, an editable two-layer PCB, reproducible ngspice analysis, and an explicit engineering verification record.
Explore the interactive project · Native 3D assembly (GLB)
The image is a native CAD rendering, not a photograph of manufactured hardware.

Main components on the Dc dc buck converter
Dc dc buck converter bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS54302 | SOT-23-6 | U1 |
| 1 | 9-18V IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | 5V / 2A OUT | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | 10uH | Wurth_7447714100 | L1 |
| 1 | 10uF / 35V | C_1210_3225Metric | C1 |
| 2 | 100nF / 50V | C_0603_1608Metric | C2, C5 |
| 3 | 22uF / 25V | C_1210_3225Metric | C3, C4, C7 |
| 1 | 82pF / 50V | C_0603_1608Metric | C6 |
| 1 | 90.9k / 0.1% | R_0603_1608Metric | R1 |
| 1 | 12.3k / 0.1% | R_0603_1608Metric | R2 |
| 1 | 49.9 / 1% | R_0603_1608Metric | R3 |
| 1 | 511k / 1% | R_0603_1608Metric | R4 |
| 1 | 105k / 1% | R_0603_1608Metric | R5 |
Dc dc buck converter design files
The KiCad project lives in the ojomodel/dc-dc-buck-converter repository on GitHub; these links point at the commit this page was built from.
Dc dc buck converter: common questions
How big is the Dc dc buck converter PCB?
The Dc dc buck converter measures 54 × 34 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dc dc buck converter?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dc dc buck converter design files?
From the ojomodel/dc-dc-buck-converter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Dc dc buck converter design in my own project?
Yes, under the terms of its MIT license, which ojomodel chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k