Jlr tube 6n28b
Oleg-mk·JLR-MOST-Amp·tube/6n28b/jlr_tube_6n28b.kicad_pcb
About the Jlr tube 6n28b PCB
Jlr tube 6n28b is an open source PCB design by Oleg-mk, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 120.2 × 90 mm, with 164 components from 77 distinct parts.
Other key parts include the LM65625-Q1, LM5022-Q1, TPS7B8133DRV, TPS3808G01-Q1 and TPS1H200A-Q1. By type, the board carries 70 resistors, 63 capacitors, 7 connectors, 6 ICs, 5 transistors and 4 diodes.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
Stand-in for the stock JLR MOST25 amplifier: the head unit's sound controls applied digitally with no quality loss, a phone mixed in over Bluetooth or Wi-Fi, analog, I2S and S/PDIF out
A stand-in for the stock JLR MOST25 amplifier. It takes the digital sound off the ring, carries out the head unit's commands with no loss of quality and sends the sound on to your own DAC or amplifier. A phone joins over Bluetooth or AirPlay.
Jaguar, Land Rover and JLR are trademarks of their owners. This project is not affiliated with them.
- Fit your own DAC and amplifier and keep the stock head unit with all its controls: volume, tone, mute, navigation, phone, parking sensors and chimes. - Play a phone through the same system, with no cables.
Main components on the Jlr tube 6n28b
Jlr tube 6n28b bill of materials (BOM)
164 components, 77 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM65625-Q1 | TI_RZT0020A | U1 |
| 1 | LM5022-Q1 | MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | TPS7B8133DRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U3 |
| 2 | TPS3808G01-Q1 | SOT-23-6 | U4, U6 |
| 1 | TPS1H200A-Q1 | HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm | U5 |
| 1 | IPD60R600P7 | TO-252-2 | Q1 |
| 4 | DN2540N8 | SOT-89-3 | Q2, Q3, Q4, Q5 |
| 1 | гніздо 1x5 | PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | 43045-0221 | Molex_Micro-Fit_3.0_43045-0221_2x01-1MP_P3.00mm_Horizontal | J2 |
| 1 | гніздо 1x4 | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 2 | NC3MAH | Neutrik_NC3MAH | J5, J6 |
| 1 | RCA OUT L | BKL_0101153_RCA_RA | J7 |
| 1 | RCA OUT R | BKL_0101153_RCA_RA | J8 |
| 1 | 3A T 0452003 | Fuse_Littelfuse-NANO2-451_453 | F1 |
| 2 | 6N28B-V | Valve_6N28B-V_Flat_458 | V1, V3 |
| 2 | 6N28B-V | Valve_6N28B-V_Flat | V2, V4 |
| 1 | SS54 | D_SMC | D1 |
| 1 | SM6T30A | D_SMB | D2 |
| 1 | ES1J | D_SMA | D3 |
| 1 | BAT54W | D_SOD-123 | D4 |
Show 57 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLM41PG600SN1 | L_1806_4516Metric | FB1 |
| 1 | 10u NRSE8040-100M | L_Bourns-SRN8040_8x8.15mm | L1 |
| 1 | 2.2u CKCSA4020-2.2uH/M | L_Coilcraft_XxL4030 | L2 |
| 1 | 33u CDRH129RNP-330MC | L_Coilcraft_MSS1278-XXX | L3 |
| 6 | 100n 50V | C_0805_2012Metric | C1, C17, C27, C59, C62, C64 |
| 2 | 47u 50V | CP_Elec_8x10 | C2, C61 |
| 4 | 10u 50V | C_1210_3225Metric | C4, C5, C16, C58 |
| 2 | 100n 50V | C_0603_1608Metric | C6, C7 |
| 1 | 100N 100n | C_0603_1608Metric | C8 |
| 1 | 1u | C_0603_1608Metric | C9 |
| 4 | 22u 16V | C_1206_3216Metric | C10, C11, C54, C55 |
| 2 | 1u 50V | C_0805_2012Metric | C12, C23 |
| 1 | 1u 25V | C_0805_2012Metric | C13 |
| 3 | 100N 100n | C_0805_2012Metric | C14, C25, C57 |
| 1 | 1n | C_0805_2012Metric | C15 |
| 3 | 100n 630V | C_1812_4532Metric | C18, C19, C63 |
| 2 | 10u 350V | CP_Radial_D10.0mm_P5.00mm | C20, C60 |
| 1 | 220N 220n | C_0805_2012Metric | C21 |
| 1 | 100P 100p | C_0805_2012Metric | C22 |
| 1 | 2.2U 2.2u | C_0805_2012Metric | C24 |
| 1 | 2.2u 10V | C_0805_2012Metric | C26 |
| 2 | 100p C0G | C_0805_2012Metric | C28, C41 |
| 2 | 47u 250V | CP_Radial_D12.5mm_P5.00mm | C29, C42 |
| 2 | 100n 250V | C_1206_3216Metric | C30, C43 |
| 6 | 100n 250V | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C31, C32, C33, C44, C45, C46 |
| 2 | 470n 250V | C_1210_3225Metric | C34, C47 |
| 4 | 4.7u 250V MKS4 | C_Rect_L31.5mm_W11.0mm_P27.50mm_MKS4 | C35, C36, C48, C49 |
| 6 | 1n C0G | C_0805_2012Metric | C37, C38, C39, C50, C51, C52 |
| 2 | 10n 100V | C_0805_2012Metric | C40, C53 |
| 1 | 1.5u 10V | C_0805_2012Metric | C56 |
| 4 | 100K 100k | R_0805_2012Metric | R1, R3, R6, R66 |
| 1 | 14.3K 14.3k | R_0805_2012Metric | R2 |
| 2 | 18.7K 18.7k | R_0805_2012Metric | R4, R7 |
| 1 | 115K 115k | R_0805_2012Metric | R5 |
| 3 | 10 | R_0805_2012Metric | R8, R43, R65 |
| 2 | 47K 47k | R_0805_2012Metric | R9, R16 |
| 1 | 0.18 1% | R_1206_3216Metric | R10 |
| 7 | 100 | R_0805_2012Metric | R11, R40, R41, R42, R62, R63, R64 |
| 3 | 330K 330k | R_1206_3216Metric | R12, R13, R14 |
| 1 | 5.9K 5.9k | R_0805_2012Metric | R15 |
| 1 | 1M | R_0805_2012Metric | R17 |
| 1 | 52.3K 52.3k | R_0805_2012Metric | R18 |
| 2 | 10K 10k | R_0805_2012Metric | R19, R20 |
| 1 | 4.02K 4.02k | R_0805_2012Metric | R21 |
| 2 | 36K 36k | R_0805_2012Metric | R22, R44 |
| 2 | 4.7K 4.7k | R_0805_2012Metric | R23, R45 |
| 2 | 1k | R_0805_2012Metric | R24, R46 |
| 2 | 470 | R_1206_3216Metric | R25, R47 |
| 2 | 27K 27k | R_2512_6332Metric | R26, R48 |
| 2 | 820 | R_0805_2012Metric | R27, R49 |
| 10 | 1M | R_1206_3216Metric | R28, R32, R33, R34, R35, R50, R54, R55 +2 |
| 2 | 15K 15k | R_2512_6332Metric | R29, R51 |
| 2 | 680 | R_0805_2012Metric | R30, R52 |
| 2 | 14.3K 14.3k | R_2512_6332Metric | R31, R53 |
| 4 | 620 | R_0805_2012Metric | R36, R37, R58, R59 |
| 4 | 47K 47k | R_1206_3216Metric | R38, R39, R60, R61 |
| 4 | 10K 10k | R_2512_6332Metric | R67, R68, R69, R70 |
Jlr tube 6n28b design files
The KiCad project lives in the Oleg-mk/JLR-MOST-Amp repository on GitHub; these links point at the commit this page was built from.
Jlr tube 6n28b: common questions
How big is the Jlr tube 6n28b PCB?
The Jlr tube 6n28b measures 120.2 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jlr tube 6n28b?
164 components, from 77 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jlr tube 6n28b design files?
From the Oleg-mk/JLR-MOST-Amp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jlr tube 6n28b design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Oleg-mk chose for the repository.
More boards in JLR-MOST-Amp
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956