Jlr most amp
Oleg-mk·JLR-MOST-Amp·hw4/jlr_most_amp.kicad_pcb
About the Jlr most amp PCB
Jlr most amp is an open source ESP32 PCB design by Oleg-mk, published on GitHub under the CERN-OHL-S-2.0 license. It is a 4-layer board measuring 120.1 × 58.6 mm, with 147 components from 61 distinct parts.
Its main chip is the ESP32-WROVER-IE-N16R8, from the ESP32 family. Other key parts include the OS8104AAQ, PCM5122PW, 74LVC1G125, PLT133/T10W and DS90LV047ATMTCX. By type, the board carries 63 capacitors, 45 resistors, 13 ICs, 10 connectors, 5 inductors and 4 diodes.
It belongs with the audio and iot & wireless designs in this gallery.
From the project
Stand-in for the stock JLR MOST25 amplifier: the head unit's sound controls applied digitally with no quality loss, a phone mixed in over Bluetooth or Wi-Fi, analog, I2S and S/PDIF out
A stand-in for the stock JLR MOST25 amplifier. It takes the digital sound off the ring, carries out the head unit's commands with no loss of quality and sends the sound on to your own DAC or amplifier. A phone joins over Bluetooth or AirPlay.
Jaguar, Land Rover and JLR are trademarks of their owners. This project is not affiliated with them.
- Fit your own DAC and amplifier and keep the stock head unit with all its controls: volume, tone, mute, navigation, phone, parking sensors and chimes. - Play a phone through the same system, with no cables.
Main components on the Jlr most amp
Jlr most amp bill of materials (BOM)
147 components, 61 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | OS8104AAQ | LQFP-44_10x10mm_P0.8mm | U1 |
| 1 | ESP32-WROVER-IE-N16R8 | ESP32-WROVER-IE | U2 |
| 1 | PCM5122PW | TSSOP-28_4.4x9.7mm_P0.65mm | U3 |
| 1 | 74LVC1G125 | SOT-23-5 | U4 |
| 1 | PLT133/T10W | Everlight_TOSLINK_T10 | U5 |
| 1 | DS90LV047ATMTCX | TSSOP-16_4.4x5mm_P0.65mm | U6 |
| 2 | TPS7B8133DRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U7, U9 |
| 1 | LM65625-Q1 | TI_RZT0020A | U8 |
| 1 | TPS1H200A-Q1 | HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm | U10 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U11 |
| 1 | AP2112K-3.3 | SOT-23-5 | U12 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U13 |
| 1 | BSS84 | SOT-23 | Q1 |
| 2 | MMBT3904 | SOT-23 | Q2, Q3 |
| 1 | 12.288MHZ 12.288MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 43045-0421 | Molex_Micro-Fit_3.0_43045-0421_2x02-1MP_P3.00mm_Horizontal | J1 |
| 1 | TE 1-1394640-1 | TE_MOST_Pigtail_FOT_2+0 | J2 |
| 2 | штирі 1x4 | PinHeader_1x04_P2.54mm_Vertical | J3, J8 |
| 1 | RCA L | BKL_0101153_RCA_RA | J4 |
| 1 | RCA R | BKL_0101153_RCA_RA | J5 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RCA S/PDIF | BKL_0101153_RCA_RA | J6 |
| 1 | HDMI I2S | HDMI_A_Kycon_KDMIX-SL1-NS-WS-B15_VerticalRightAngle | J7 |
| 1 | штирі 1x5 | PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | USB-C | USB_C_Receptacle_14P_SideInsert_THT | J10 |
| 1 | 1.5A T | Fuse_1206_3216Metric | F1 |
| 1 | DP-04 Piano | SW_DIP_SPSTx04_Piano_10.8x11.72mm_W7.62mm_P2.54mm | SW1 |
| 1 | TL3305A | SW_SPST_TL3305A | SW2 |
| 1 | SS34 | D_SMA | D1 |
| 1 | SM6T30A | D_SMB | D2 |
| 1 | BAT54C | SOT-23 | D3 |
| 1 | LED 3 mm | LED_D3.0mm | D20 |
| 3 | 600R@100MHz | L_0603_1608Metric | FB1, FB2, FB3 |
| 1 | 10u NRSE6028-100M | L_Bourns-SRN6028 | L1 |
| 1 | 2.2u CKCSA4020-2.2uH/M | L_Coilcraft_XxL4030 | L2 |
| 25 | 100N 100n | C_0603_1608Metric | C1, C3, C5, C6, C8, C9, C15, C16 +17 |
| 7 | 10U 10u | C_0805_2012Metric | C2, C4, C7, C10, C30, C32, C34 |
| 2 | 18P 18p | C_0603_1608Metric | C11, C12 |
| 1 | 100n C0G | C_1206_3216Metric | C13 |
| 5 | 1u | C_0603_1608Metric | C14, C22, C54, C66, C67 |
| 3 | 22U 22u | C_1206_3216Metric | C20, C58, C59 |
| 4 | 2.2U 2.2u | C_0805_2012Metric | C36, C37, C52, C62 |
| 2 | 2.2n C0G | C_0603_1608Metric | C39, C40 |
| 2 | 47u 50V | CP_Elec_8x10 | C50, C65 |
| 3 | 1u 50V | C_0805_2012Metric | C51, C61, C72 |
| 2 | 10u 50V | C_1210_3225Metric | C55, C56 |
| 7 | 100n 50V | C_0603_1608Metric | C57, C60, C63, C64, C75, C76, C77 |
| 2 | 100 | R_0603_1608Metric | R1, R5 |
| 4 | 100K 100k | R_0603_1608Metric | R2, R17, R50, R51 |
| 4 | 47K 47k | R_0603_1608Metric | R3, R7, R10, R11 |
| 1 | 15K 15k | R_0603_1608Metric | R4 |
| 1 | 2.2K 2.2k | R_0603_1608Metric | R6 |
| 7 | 4.7K 4.7k | R_0603_1608Metric | R8, R9, R27, R28, R57, R62, R63 |
| 14 | 10K 10k | R_0603_1608Metric | R12, R16, R20, R21, R22, R23, R24, R25 +6 |
| 2 | 68 | R_0603_1608Metric | R13, R18 |
| 2 | 47 | R_0603_1608Metric | R14, R15 |
| 1 | 1k | R_0603_1608Metric | R26 |
| 2 | 470 | R_0603_1608Metric | R32, R33 |
| 1 | 249 | R_0603_1608Metric | R34 |
| 1 | 107 | R_0603_1608Metric | R35 |
| 1 | 4.02K 4.02k | R_0603_1608Metric | R58 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R60, R61 |
Jlr most amp design files
The KiCad project lives in the Oleg-mk/JLR-MOST-Amp repository on GitHub; these links point at the commit this page was built from.
Jlr most amp: common questions
What microcontroller does the Jlr most amp use?
The Jlr most amp is built around the ESP32-WROVER-IE-N16R8, from the ESP32 family.
How big is the Jlr most amp PCB?
The Jlr most amp measures 120.1 × 58.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Jlr most amp?
147 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jlr most amp design files?
From the Oleg-mk/JLR-MOST-Amp repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jlr most amp design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which Oleg-mk chose for the repository.
Can I test firmware for the Jlr most amp without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in JLR-MOST-Amp
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k