Multi channel preamp
oletizi·multi-channel-preamp·src/schematics/multi-channel-preamp/multi-channel-preamp.kicad_pcb
About the Multi channel preamp PCB
Multi channel preamp is an open source PCB design by oletizi, published on GitHub. It is a 2-layer board measuring 74.9 × 90.2 mm, with 21 components from 16 distinct parts.
Other key parts include the ECC83. By type, the board carries 10 connectors, 8 resistors, 2 capacitors and 1 IC.
Main components on the Multi channel preamp
Multi channel preamp bill of materials (BOM)
21 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ECC83 | BELTON_VT9-PT Fat Pad | U1 |
| 1 | Channel 1 Input | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J1 |
| 1 | Ch 1 Volume | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal Fat Pad | J2 |
| 1 | Ch 1 Bypass Cap | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J3 |
| 1 | Channel 1 Output | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J4 |
| 1 | B+ | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J5 |
| 1 | Channel 2 Input | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J6 |
| 1 | Ch 2 Bypass Cap | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J8 |
| 1 | Ch 2 Volume | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal Fat Pad | J9 |
| 1 | Channel 2 Output | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J10 |
| 1 | Heater | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J11 |
| 2 | .47uF | C_Axial_L22.0mm_D9.5mm_P27.50mm_Horizontal | C1, C2 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R6 |
| 2 | 500K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5 |
| 2 | 1K2 | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3, R7 |
| 2 | 100K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R8 |
Multi channel preamp design files
The KiCad project lives in the oletizi/multi-channel-preamp repository on GitHub; these links point at the commit this page was built from.
Multi channel preamp: common questions
How big is the Multi channel preamp PCB?
The Multi channel preamp measures 74.9 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Multi channel preamp?
21 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Multi channel preamp design files?
From the oletizi/multi-channel-preamp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Multi channel preamp design in my own project?
The repository has no license, so all rights stay with oletizi. Use it as a reference, and ask the author before reusing the design.
More boards in multi-channel-preamp
Pultec 3-Band EQ
oletizi
159.5 × 120 mm73 parts2LNo license0Pultec boost high
oletizi
66.7 × 88.9 mm21 parts2LNo license0Pultec cut high
oletizi
50.8 × 68.6 mm16 parts2LNo license0Pultec cut low
oletizi
47 × 62.2 mm13 parts2LNo license0Gyraf output
oletizi
84.5 × 78.7 mm12 parts2LNo license0Tapeop output
oletizi
80 × 63.5 mm11 parts2LNo license0Pultec Inductor Board
oletizi
86 × 120 mm6 parts2LNo license0