Pultec cut high
oletizi·multi-channel-preamp·src/schematics/pultec-cut-high/pultec-cut-high.kicad_pcb
About the Pultec cut high PCB
Pultec cut high is an open source PCB design by oletizi, published on GitHub. It is a 2-layer board measuring 50.8 × 68.6 mm, with 16 components from 12 distinct parts.
By type, the board carries 10 capacitors, 5 connectors and 1 resistor.
Pultec cut high bill of materials (BOM)
16 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J1 |
| 1 | OUT | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J2 |
| 1 | HI CUT | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal Fat Pad | J3 |
| 1 | Hi Cut Selector Send | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J4 |
| 1 | Hi Cut Selector Return | TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal_Fat_Pad | J5 |
| 3 | 47n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C1, C3, C5 |
| 1 | 33n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C2 |
| 2 | 10n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C4, C7 |
| 2 | 22n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C6, C8 |
| 1 | 2n2 | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C9 |
| 1 | 15n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C10 |
| 1 | 430R | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal Fat Pad | R1 |
Pultec cut high design files
The KiCad project lives in the oletizi/multi-channel-preamp repository on GitHub; these links point at the commit this page was built from.
Pultec cut high: common questions
How big is the Pultec cut high PCB?
The Pultec cut high measures 50.8 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pultec cut high?
16 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pultec cut high design files?
From the oletizi/multi-channel-preamp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pultec cut high design in my own project?
The repository has no license, so all rights stay with oletizi. Use it as a reference, and ask the author before reusing the design.
More boards in multi-channel-preamp
Pultec 3-Band EQ
oletizi
159.5 × 120 mm73 parts2LNo license0Multi channel preamp
oletizi
74.9 × 90.2 mm21 parts2LNo license0Pultec boost high
oletizi
66.7 × 88.9 mm21 parts2LNo license0Pultec cut low
oletizi
47 × 62.2 mm13 parts2LNo license0Gyraf output
oletizi
84.5 × 78.7 mm12 parts2LNo license0Tapeop output
oletizi
80 × 63.5 mm11 parts2LNo license0Pultec Inductor Board
oletizi
86 × 120 mm6 parts2LNo license0