Tapeop output
oletizi·multi-channel-preamp·src/schematics/tapeop-output/tapeop-output.kicad_pcb
About the Tapeop output PCB
Tapeop output is an open source PCB design by oletizi, published on GitHub. It is a 2-layer board measuring 80 × 63.5 mm, with 11 components from 10 distinct parts.
Other key parts include the ECC83. By type, the board carries 4 connectors, 4 resistors, 2 capacitors and 1 IC.
Main components on the Tapeop output
Tapeop output bill of materials (BOM)
11 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ECC83 | BELTON_VT9-PT Fat Pad | U1 |
| 1 | Heater Supply | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J1 |
| 1 | B+ | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J2 |
| 1 | VOUT | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J3 |
| 1 | VIN | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J4 |
| 1 | 2.2uF 250V | C_Axial_L12.0mm_D8.5mm_P15.00mm_Horizontal Fat Pad | C1 |
| 1 | 0.1uF 250V | C_Axial_L12.0mm_D8.5mm_P15.00mm_Horizontal Fat Pad | C2 |
| 1 | 4.99K H | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal Fat Pad | R1 |
| 1 | 499R H | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal Fat Pad | R2 |
| 2 | 2.2M Q | R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal Fat Pad | R3, R4 |
Tapeop output design files
The KiCad project lives in the oletizi/multi-channel-preamp repository on GitHub; these links point at the commit this page was built from.
Tapeop output: common questions
How big is the Tapeop output PCB?
The Tapeop output measures 80 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tapeop output?
11 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tapeop output design files?
From the oletizi/multi-channel-preamp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tapeop output design in my own project?
The repository has no license, so all rights stay with oletizi. Use it as a reference, and ask the author before reusing the design.
More boards in multi-channel-preamp
Pultec 3-Band EQ
oletizi
159.5 × 120 mm73 parts2LNo license0Multi channel preamp
oletizi
74.9 × 90.2 mm21 parts2LNo license0Pultec boost high
oletizi
66.7 × 88.9 mm21 parts2LNo license0Pultec cut high
oletizi
50.8 × 68.6 mm16 parts2LNo license0Pultec cut low
oletizi
47 × 62.2 mm13 parts2LNo license0Gyraf output
oletizi
84.5 × 78.7 mm12 parts2LNo license0Pultec Inductor Board
oletizi
86 × 120 mm6 parts2LNo license0