Pultec cut low
oletizi·multi-channel-preamp·src/schematics/pultec-cut-low/pultec-cut-low.kicad_pcb
About the Pultec cut low PCB
Pultec cut low is an open source PCB design by oletizi, published on GitHub. It is a 2-layer board measuring 47 × 62.2 mm, with 13 components from 13 distinct parts.
By type, the board carries 7 capacitors, 5 connectors and 1 resistor.
Pultec cut low bill of materials (BOM)
13 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J1 |
| 1 | OUT | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J2 |
| 1 | Low Cut Select Send | TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal_Fat_Pad | J3 |
| 1 | Low Cut Select Return | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal Fat Pad | J4 |
| 1 | Low Cut Level | TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal Fat Pad | J5 |
| 1 | 18n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C1 |
| 1 | 10n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C2 |
| 1 | 4.7n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C3 |
| 1 | 1n | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C4 |
| 1 | 3n3 | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C5 |
| 1 | 2n2 | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C6 |
| 1 | 1n8 | C_Rect_L7.0mm_W2.0mm_P5.00mm_Fat_Pad | C7 |
| 1 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
Pultec cut low design files
The KiCad project lives in the oletizi/multi-channel-preamp repository on GitHub; these links point at the commit this page was built from.
Pultec cut low: common questions
How big is the Pultec cut low PCB?
The Pultec cut low measures 47 × 62.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pultec cut low?
13 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pultec cut low design files?
From the oletizi/multi-channel-preamp repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pultec cut low design in my own project?
The repository has no license, so all rights stay with oletizi. Use it as a reference, and ask the author before reusing the design.
More boards in multi-channel-preamp
Pultec 3-Band EQ
oletizi
159.5 × 120 mm73 parts2LNo license0Pultec boost high
oletizi
66.7 × 88.9 mm21 parts2LNo license0Multi channel preamp
oletizi
74.9 × 90.2 mm21 parts2LNo license0Pultec cut high
oletizi
50.8 × 68.6 mm16 parts2LNo license0Gyraf output
oletizi
84.5 × 78.7 mm12 parts2LNo license0Tapeop output
oletizi
80 × 63.5 mm11 parts2LNo license0Pultec Inductor Board
oletizi
86 × 120 mm6 parts2LNo license0