GateMateA1-EVB Rev B
OLIMEX·GateMateA1-EVB·HARDWARE/GateMateA1-EVB-Rev.B/GateMateA1-EVB_Rev_B.kicad_pcb
About the GateMateA1-EVB Rev B PCB
GateMateA1-EVB Rev B is an open source RP2040/RP2350 PCB design by OLIMEX, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 120 × 80 mm, with 288 components from 79 distinct parts.
Its main chip is the NA(ZD25WQ16CSIGT(SOIC-8_208mils)), from the RP2040/RP2350 family. Other key parts include the CCGM1A1(FBGA-324), HX7027(SOT-23-3), NA(MCP120T-300I/TT(SOT-23-3)), TXB0108PWR(TSSOP-20) and LY68S3200SLT(SOIC-8_150mil). By type, the board carries 126 capacitors, 79 resistors, 15 ICs, 7 inductors, 6 LEDs and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Development board for GateMateA1 CCGM1A1 FPGA from Cologne Chip with PS2 VGA 64Mbit RAM RP2040
https://www.olimex.com/Products/FPGA/GateMate/GateMateA1-EVB/open-source-hardware
CCGM1A1 FPGA with 20480 logic cells PSRAM 64Mbit RP2040 processor for prograaming and debugging 2MB configuration Flash 4 buttons USB-C for power supply and programming PS2 connector VGA connector 4 Banks with signals with selectable levels 1.2V 1.8V 2.5V PMOD with level shifters UEXT with level shifters Power LED User LED 4 sections configuration slide switch * Dimensions: 120 x 80 mm

Main components on the GateMateA1-EVB Rev B
GateMateA1-EVB Rev B bill of materials (BOM)
288 components, 79 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CCGM1A1(FBGA-324) | FBGA-324_P0.8mm_Pad0.4mm_Ball0.45mm_Dim15.00x15.00x1.20mm | U1 |
| 1 | HX7027(SOT-23-3) | SOT-23 | U2 |
| 1 | NA(ZD25WQ16CSIGT(SOIC-8_208mils)) | SO-8_208mil | U3 |
| 1 | NA(MCP120T-300I/TT(SOT-23-3)) | SOT-23 | U4 |
| 2 | TXB0108PWR(TSSOP-20) | TSSOP20_Pitch-0.65mm_6.6x4.5x1.2mm | U5, U6 |
| 2 | LY68S3200SLT(SOIC-8_150mil) | SOIC-8_150mil | U7, U9 |
| 1 | ZD25WQ16CSIGT(SOIC-8_208mils) | SO-8_208mil | U8 |
| 1 | RP2040(QFN-56_7x7mm_P0.4mm) | QFN56_7x7_Pitch_0.4mm | U10 |
| 5 | TPS62A02ADRLR(SOT-563-6) | SOT-563-6 | U11, U12, U13, U14, U15 |
| 1 | Q12MHZ/20PF/10PPM/4P/3.2X2.5MM Q12MHz/20pF/10ppm/4P/3.2x2.5mm | TSX-3.2x2.5mm_GND(3) | Q1 |
| 8 | TESTPAD | TEST_PAD_40x70_Round | +1V2, +1V8, +2V5, +3V3, +5V_USB1, GND1, TRST1, VDD_CORE1 |
| 3 | B-V-20-LF | GBH-254-SMT-20 | BANK_EB1, BANK_NA1, BANK_NB1 |
| 1 | B-V-34-LF | GBH-254-SMT-34 | BANK_MISC1 |
| 1 | DSHP04TS-S | DSHP04TS-S-1.27mm_Half_4_Slide | CFG_SET1 |
| 2 | H-WX-1x2-LF(Closed) | HN1x2(SMD)_H-WX-1x2-LF | CLK0_EN1, POR_EN1 |
| 1 | Q10MHz/30ppm/1.62V-3.63V/4P/5x3.2mm(SX5M10.000M20F30TNN_LCSC-C2901522) | 5032-4P_HCX-3S | CR1 |
| 2 | BSS138(SOT-23-3) | SOT23 | FET1, FET2 |
| 4 | YTS-A016-X | YTS-A016-X | FPGA_BUT1, FPGA_RST1, RP-BOOT1, RP-RST1 |
| 6 | MJ6 | MJ6 | JUMP_CAP1, JUMP_CAP2, JUMP_CAP3, JUMP_CAP4, JUMP_CAP5, JUMP_CAP6 |
| 4 | Mounting_Hole_NPTH | Mounting_Hole_Drill-3.3mm_Clerance-7mm | MH1, MH2, MH3, MH4 |
Show 59 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MDR6_MINI-DIN | PS2_MDR6_MINI-DIN | PS2_KBD1 |
| 1 | F-R-2X06-LF F-R-2x06-LF | Digilent_Pmod_12-pin | Pmod1 |
| 2 | RA1206_(4x0603)_4B8_10k | RA1206_(4X0603)_4B8_xx | RM1, RM2 |
| 1 | NA(RA1206_(4x0603)_4B8_10k) | RA1206_(4X0603)_4B8_xx | RM3 |
| 1 | NA(HN1x3) | HN1x3 | SWD1 |
| 1 | Sign_RecycleBin_1 | Sign_RecycleBin_1 | Sign_RecycleBin_1 |
| 1 | Sign_RoHS_1 | Sign_RoHS_1 | Sign_RoHS_1 |
| 5 | NA(GG0402052R542P) | D_0402_5MIL_DWS | TVS1, TVS2, TVS3, TVS4, TVS5 |
| 1 | P-B-V-10-LF | GBH-254-SMT-10 | UEXT1 |
| 1 | USB-C-16P-F(A40-00119-A52-12) | USB2.0_TYPE-C(A40-00119-A52-12)_Paste | USB-C1 |
| 1 | Closed | SJ_Closed | VDD_CORE_E1 |
| 1 | H-WX-1x3-LF(1-2:Closed/2-3:Opened) | HN1x3(SMD)_H-WX-1x3-LF | VDD_CORE_SET1 |
| 3 | H-V33X-2x03-LF(1-2:Closed) | GPH254SMT02x03(H-V33X-2X3-LF) | VDD_EB_SEL1, VDD_NA_SEL1, VDD_NB_SEL1 |
| 1 | HDR15-3.08-14.5T/VGA15/14.5MM HDR15-3.08-14.5T/VGA15/14.5mm | VGA15-F(HDR15-3.08-14.5T)_DrillSlot | VGA1 |
| 2 | LED/GREEN/0603 | LED_0603_KA | CFG_DONE_LED1, FPGA_LED1 |
| 3 | LED/RED/0603 | LED_0603_KA | CFG_FAILED_LED1, FPGA_RST_LED1, PWR_LED1 |
| 1 | LED/YELLOW/0603 | LED_0603_KA | JTAG_LED1 |
| 1 | 1N5819S4/SOD123 | SOD-123_1C-2A_KA | D1 |
| 2 | FB0805/600R/2A | L_0805_5MIL_DWS | L1, L2 |
| 5 | 1.0uH/2.5A/DCR=30mR/20%/3.00x3.00x1.50mm/CD32(SWPA3015S1R0MT) | CD32 | L3, L4, L5, L6, L7 |
| 18 | 2.2uF/6.3V/20%/X5R/C0402 | C_0402_5MIL_DWS | C1, C2, C3, C4, C5, C6, C7, C8 +10 |
| 41 | 100nF/10V/20%/X5R/C0402 | C_0402_5MIL_DWS | C9, C10, C11, C12, C13, C14, C15, C16 +33 |
| 45 | 1nF/50V/10%/X7R/C0402 | C_0402_5MIL_DWS | C17, C18, C19, C20, C21, C22, C23, C24 +37 |
| 3 | 10uF/6.3V/X5R/20%/C0402 | C_0402_5MIL_DWS | C39, C40, C126 |
| 6 | 22uF/6.3V/20%/X5R/C0603 | C_0603_5MIL_DWS | C83, C112, C114, C118, C120, C124 |
| 1 | NA(100nF/10V/20%/X5R/C0402) | C_0402_5MIL_DWS | C84 |
| 1 | NA/C0402 | C_0402_5MIL_DWS | C93 |
| 2 | 18pF/50V/5%/C0G/C0402 | C_0402_5MIL_DWS | C110, C111 |
| 5 | 47uF/6.3V/20%/X5R/C0805 | C_0805_5MIL_DWS | C113, C115, C119, C121, C125 |
| 4 | NA(2.2uF/6.3V/20%/X5R/C0402) | C_0402_5MIL_DWS | C116, C117, C122, C123 |
| 2 | NA(200R/1%/R0402) | R_0402_5MIL_DWS | R1, R4 |
| 4 | 0R/R0402 | R_0402_5MIL_DWS | R2, R3, R6, R10 |
| 1 | 4.7R/R0402 | R_0402_5MIL_DWS | R5 |
| 8 | 2.2K/R0402 2.2k/R0402 | R_0402_5MIL_DWS | R7, R17, R18, R25, R26, R27, R66, R76 |
| 10 | 10K/R0402 10k/R0402 | R_0402_5MIL_DWS | R8, R19, R23, R24, R28, R29, R30, R45 +2 |
| 1 | NA(0R/R0402) | R_0402_5MIL_DWS | R9 |
| 4 | NA(R0402) | R_0402_5MIL_DWS | R11, R12, R13, R15 |
| 4 | NA(10k/R0402) | R_0402_5MIL_DWS | R14, R16, R21, R49 |
| 6 | 100R/R0402 | R_0402_5MIL_DWS | R20, R36, R46, R50, R51, R59 |
| 1 | 200R/1%/R0402 | R_0402_5MIL_DWS | R22 |
| 3 | 22R/R0402 | R_0402_5MIL_DWS | R31, R54, R58 |
| 3 | 430R/1%/R0402 | R_0402_5MIL_DWS | R32, R37, R41 |
| 3 | 866R/1%/R0402 | R_0402_5MIL_DWS | R33, R38, R42 |
| 3 | 2.05k/1%/R0402 | R_0402_5MIL_DWS | R34, R39, R43 |
| 3 | 4.42k/1%/R0402 | R_0402_5MIL_DWS | R35, R40, R44 |
| 2 | NA(22R/R0402) | R_0402_5MIL_DWS | R47, R48 |
| 1 | NA(100R/R0402) | R_0402_5MIL_DWS | R52 |
| 2 | 27R/R0402 | R_0402_5MIL_DWS | R55, R56 |
| 1 | 3.32k/1%/R0402 | R_0402_5MIL_DWS | R60 |
| 1 | 4.7k/1%/R0402 | R_0402_5MIL_DWS | R61 |
| 4 | 100K/R0402 100k/R0402 | R_0402_5MIL_DWS | R62, R63, R69, R70 |
| 2 | 1.05k/1%/R0402 | R_0402_5MIL_DWS | R64, R65 |
| 1 | 20k/1%/R0402 | R_0402_5MIL_DWS | R67 |
| 3 | 10k/1%/R0402 | R_0402_5MIL_DWS | R68, R71, R72 |
| 1 | 1k/1%/R0402 | R_0402_5MIL_DWS | R73 |
| 2 | 5.1k/1%/R0402 | R_0402_5MIL_DWS | R74, R75 |
| 1 | 6.04k/1%/R0402 | R_0402_5MIL_DWS | R77 |
| 1 | 2k/1%/R0402 | R_0402_5MIL_DWS | R78 |
| 1 | 3.01k/1%/R0402 | R_0402_5MIL_DWS | R79 |
GateMateA1-EVB Rev B design files
The KiCad project lives in the OLIMEX/GateMateA1-EVB repository on GitHub; these links point at the commit this page was built from.
GateMateA1-EVB Rev B: common questions
What microcontroller does the GateMateA1-EVB Rev B use?
The GateMateA1-EVB Rev B is built around the NA(ZD25WQ16CSIGT(SOIC-8_208mils)), from the RP2040/RP2350 family.
How big is the GateMateA1-EVB Rev B PCB?
The GateMateA1-EVB Rev B measures 120 × 80 mm, has 4 copper layers and is 1.578 mm thick.
How many components are on the GateMateA1-EVB Rev B?
288 components, from 79 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GateMateA1-EVB Rev B design files?
From the OLIMEX/GateMateA1-EVB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GateMateA1-EVB Rev B design in my own project?
Yes, under the terms of its GPL-3.0 license, which OLIMEX chose for the repository.
Can I test firmware for the GateMateA1-EVB Rev B without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in GateMateA1-EVB
Similar boards
RP2040/RP2350
Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k