5 open source boards using the LY68S3200SLT(SOIC-8_150mil)
Real designs built with the LY68S3200SLT(SOIC-8_150mil), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP-EVB
OLIMEX
33 × 48.3 mm123 parts2LApache-2.051RP2040/RP2350
GateMateA1-EVB Rev B
OLIMEX
120 × 80 mm288 parts4LGPL-3.046ESP32
ESP-PRO
OLIMEX
33 × 48.3 mm122 parts2LApache-2.051RP2040/RP2350
GateMateA1-EVB Rev C
OLIMEX
120 × 80 mm288 parts4LGPL-3.046RP2040/RP2350
GateMateA1-EVB Rev A
OLIMEX
120 × 80 mm287 parts4LGPL-3.046
The LY68S3200SLT(SOIC-8_150mil) in open source designs
The gallery holds 5 open source boards using the LY68S3200SLT(SOIC-8_150mil) from 2 GitHub repositories; a typical one measures about 120 × 80 mm and carries around 287 components.
60% use four copper layers or more, and 100% carry an open source license.
The most starred is ESP-EVB by OLIMEX.
Parts used alongside the LY68S3200SLT(SOIC-8_150mil)
Microcontrollers on boards using the LY68S3200SLT(SOIC-8_150mil)
What boards using the LY68S3200SLT(SOIC-8_150mil) are built for
LY68S3200SLT(SOIC-8_150mil): common questions
Where can I find a LY68S3200SLT(SOIC-8_150mil) reference design?
Each of the 5 boards on this page is a real design using the LY68S3200SLT(SOIC-8_150mil). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LY68S3200SLT(SOIC-8_150mil) use?
Most are built on RP2040/RP2350 (3) and ESP32 (2).
How big is a typical board using the LY68S3200SLT(SOIC-8_150mil)?
The median is 120 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the LY68S3200SLT(SOIC-8_150mil)?
By GitHub stars, ESP-EVB by OLIMEX, with 51 stars.
Can I simulate one of these boards using the LY68S3200SLT(SOIC-8_150mil) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.