HardLabs

ICE40HX1K-EVB Rev B

OLIMEX·iCE40HX1K-EVB

ICE40HX1K-EVB Rev B PCB layout, top view — open source FPGA board by OLIMEX

About the ICE40HX1K-EVB Rev B PCB

ICE40HX1K-EVB Rev B is an open source FPGA PCB design by OLIMEX, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 50 × 50 mm, with 71 components from 26 distinct parts.

Its main chip is the ICE40HX1K-VQ100(VQFP100), from the FPGA family. Other key parts include the W25Q16BVSSIG(SOIC-8_208mil), SY8009AAAC(SOT23-5) and K6R4016V1D-TC10(TSOP-44). By type, the board carries 28 capacitors, 19 resistors, 5 ICs, 4 LEDs, 2 diodes and 2 inductors.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

FPGA development board made with KiCAD

Main components on the ICE40HX1K-EVB Rev B

W25Q16BVSSIG(SOIC-8_208mil)SY8009AAAC(SOT23-5)ICE40HX1K-VQ100(VQFP100)K6R4016V1D-TC10(TSOP-44)

ICE40HX1K-EVB Rev B bill of materials (BOM)

71 components, 26 distinct parts.

QtyPartRefs
1
W25Q16BVSSIG(SOIC-8_208mil)
U1
2
SY8009AAAC(SOT23-5)
U2, U3
1
ICE40HX1K-VQ100(VQFP100)
U4
1
K6R4016V1D-TC10(TSOP-44)
U5
3
Opened
3.3V_E1, RxD_E1, TxD_E1
3
T1107A(6x3,8x2,5MM)
BUT1, BUT2, RESET1
1
Oscillator-100MHZ_TXC-7W
CR1
1
NA(5025)
FUSE1
1
BH34R
GPIO1
1
BH10S
PGM1
1
PWRJ-2mm(YDJ-1136)
PWR1
1
LED/Green/0603
CDone1
3
LED/Red/0603
LED1, LED2, PWRLED1
1
SMBJ6.0A
D1
1
1N5819(S4SOD-123)
D2
2
2.2uH/1.5A/DCR<0.1R/CD32
L1, L2
6
22uF/6.3V/0603
C1, C2, C7, C8, C9, C10
17
100nF
C3, C4, C11, C12, C13, C14, C15, C16 +9
2
47uF/6.3V/0805
C5, C6
3
NA(100nF)
C19, C20, C27
Show 6 more
QtyPartRefs
6
10k
R1, R4, R11, R15, R16, R17
4
2.2k
R2, R12, R13, R14
4
22R
R3, R9, R10, R18
3
4.99k/1%
R5, R7, R8
1
1.1k/1%
R6
1
NA(22R)
R19

ICE40HX1K-EVB Rev B design files

The KiCad project lives in the OLIMEX/iCE40HX1K-EVB repository on GitHub; these links point at the commit this page was built from.

ICE40HX1K-EVB Rev B: common questions

What microcontroller does the ICE40HX1K-EVB Rev B use?

The ICE40HX1K-EVB Rev B is built around the ICE40HX1K-VQ100(VQFP100), from the FPGA family.

How big is the ICE40HX1K-EVB Rev B PCB?

The ICE40HX1K-EVB Rev B measures 50 × 50 mm, has 4 copper layers and is 1.5 mm thick.

How many components are on the ICE40HX1K-EVB Rev B?

71 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the ICE40HX1K-EVB Rev B design files?

From the OLIMEX/iCE40HX1K-EVB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ICE40HX1K-EVB Rev B design in my own project?

Yes, under the terms of its Apache-2.0 license, which OLIMEX chose for the repository.

Can I test firmware for the ICE40HX1K-EVB Rev B without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.

More boards in iCE40HX1K-EVB

Similar boards